manualshive.com logo in svg

Yamaha Raptor 700R YFM70RSPX, Руководство пользователя

Поделиться
Скачать
Yamaha Raptor 700R YFM70RSPX Скачать руководство пользователя страница 111

 

8-24

 

1

2

3

4

5

6

7

8

9

10

11

 

1. Start the engine and warm it up.

NOTE:

 

The engine is warm when it quickly responds to the

 

throttle.

2. Attach the tachometer to the spark plug lead.
3. Check the engine idling speed and, if neces-

sary, adjust it to specification by turning the
idle adjusting screw. To increase the engine
idling speed, turn the idle adjusting screw in
direction (a), and to decrease it, turn the screw
in direction (b).

NOTE:

 

If the specified idling speed cannot be obtained as
described above, have a Yamaha dealer make the

 

adjustment.

 

EBU24043

 

Adjusting the throttle cable free play 

 

The throttle cable free play should be checked
and, if necessary, adjusted at the intervals speci-
fied in the periodic maintenance and lubrication
chart.
The throttle cable free play should measure 2.0–
4.0 mm (0.08–0.16 in) at the throttle lever. Period-
ically check the throttle cable free play and, if nec-
essary, adjust it as follows.

NOTE:

 

The engine idling speed must be checked, and ad-
justed if necessary, before adjusting the throttle ca-

 

ble free play.

1. Loosen the locknut.
2. To increase the throttle cable free play, turn

the adjusting bolt in direction (a). To decrease

 

1.  Idle adjusting screw

1

(a)

(b)

 

Engine idling speed:

1500–1700 r/min

Содержание Raptor 700R YFM70RSPX































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды