manualshive.com logo in svg

Yamaha RAPTOR 350, Руководство пользователя

Поделиться
Скачать
Yamaha RAPTOR 350 Скачать руководство пользователя страница 99

7-36

RIDING OVER ROUGH TERRAIN 

Riding over rough terrain should be done with
caution. Look out for obstacles which could
cause damage to the ATV or could lead to an
upset or accident. Be sure to keep your feet
firmly mounted on the footboards at all times.
Avoid jumping the ATV as loss of control and
damage to the ATV may result.

WARNING

POTENTIAL HAZARD 
Improperly operating over obstacles. 
WHAT CAN HAPPEN 
Could cause loss of control or a colli-
sion. Could cause the ATV to overturn. 
HOW TO AVOID THE HAZARD 
Before operating in a new area, check
for obstacles. 
Never attempt to ride over large obsta-
cles, such as large rocks or fallen trees.
When you go over obstacles, always fol-
low proper procedures as described in
the Owner’s Manual.

U5YT13.book  Page 36  Wednesday, June 29, 2005  10:35 AM

Содержание RAPTOR 350












































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды