manualshive.com logo in svg

Yamaha RAPTOR 350, Руководство пользователя, Страница: 27 / 171

Поделиться
Скачать
Yamaha RAPTOR 350 Скачать руководство пользователя страница 27

4-5

EBU01159

Speed limiter

The speed limiter keeps the throttle from fully
opening, even when the throttle lever is
pushed to the maximum. Turning in the ad-
justing screw limits the maximum engine pow-
er available and decreases the maximum
speed of the ATV.

1. Locknut

2. Adjusting screw

a. No more than 12 mm (0.47 in)

WARNING

POTENTIAL HAZARD 
Improper adjustment of the speed limit-
er and throttle. 
WHAT CAN HAPPEN 
The throttle cable could be damaged.
Improper throttle operation could result.
You could lose control, have an acci-
dent or be injured. 
HOW TO AVOID THE HAZARD 
Do not turn the adjusting screw out
more than 12 mm (0.47 in). Always make
sure the throttle lever free play is adjust-
ed to 2–4 mm (0.08–0.16 in). See page
8-19.

U5YT13.book  Page 5  Wednesday, June 29, 2005  10:35 AM

Содержание RAPTOR 350












































































































































































Отзывы:

Нет отзывов