Yamaha R6 YZF600W, Руководство пользователя

Страница: 43 / 108

Instrument an d control functions
4-24
4

Use the special wrench and
the extension bar included in
the tool kit to make the ad-
justment.
3. Tighten the locknut to the speci-
fied torque.
NOTICE:
Always
ti g hten the locknut a g ainst the
a d justin g nut, an d then ti g hten
the locknut to the specifie d
torque.
[ECA10122]
Re b oun d d ampin g force
Turn the adjusting bolt in direction (a)
to increase the rebound damping
force.
Turn the adjusting bolt in direction (b)
to decrease the rebound damping
force.
To set the rebound damping force, turn
the adjuster in direction (a) until it
stops, and then count the clicks in di-
rection (b).
TIP

When turning the damping force
adjuster in direction (a), the 0 click
position and the 1 click position
may be the same.

When turning the damping force
adjuster in direction (b), it may
click beyond the stated specifica-
1. Locknut
2. Spring preload adjusting nut
3. Special wrench
4. Extension bar
1. Distance A
1
3 4
2
(a)
(b)
1
Sprin g preloa d :
Minimum (soft):
Distance A = 84.9 mm (3.34 in)
Standard:
Distance A = 89.9 mm (3.54 in)
Maximum (hard):
Distance A = 92.9 mm (3.66 in)
Ti g htenin g torque:
Locknut:
28 N·m (2.8 kgf·m, 21 lb·ft)
1. Rebound damping force adjusting bolt
Re b oun d d ampin g settin g :
Minimum (soft):
23 click(s) in direction (b)
Standard:
12 click(s) in direction (b)
Maximum (hard):
1 click(s) in direction (b)
1
(a)
(b)
UBN6EAE0.book Page 24 Friday, November 12, 2021 10:40 AM