39
En
TROUBLESHOOTING
ADDITI
O
NAL
INFO
RM
A
T
IO
N
Engli
s
h
■
Bluetooth™
The following messages may be displayed on the front panel display in certain situations.
Problem
Cause
Remedy
See
page
When using the
Universal Dock for
iPod:
Your iPhone/iPod is
not being charged
even though it is
connected to the
Universal Dock for
iPod.
This unit is not turned on.
Turn on this unit or set it to standby mode.
The iPhone/iPod is not connected
securely.
Connect the iPhone/iPod securely to the Universal
Dock for iPod.
—
When using the
Wireless System for
iPod:
Your iPhone/iPod is
not being charged
even though the
YID-W10 transmitter
connected to your
iPhone/iPod is
stationed in the
YID-W10 receiver.
This unit is not turned on.
Turn on this unit or set it to standby mode.
The YID-W10 transmitter is not stationed
securely in the YID-W10 receiver.
Station the YID-W10 transmitter connected to your
iPhone/iPod securely in the YID-W10 receiver.
—
Message
Status/Cause
Remedy
See
page
Searching...
The Bluetooth Wireless Audio Receiver
and the Bluetooth component are in the
process of pairing.
—
The Bluetooth Wireless Audio Receiver
and the Bluetooth component are in the
process of establishing a connection.
—
Completed
The pairing is completed.
—
Canceled
The pairing is canceled.
—
Connected
The connection between the Bluetooth
Wireless Audio Receiver and the
Bluetooth component is established.
—
Disconnected
The Bluetooth component is
disconnected from the Bluetooth Wireless
Audio Receiver.
—
Not found
The Bluetooth component is not found.
During pairing:
– pairing must be performed on the Bluetooth
component and this unit simultaneously. Check if
the Bluetooth component is in pairing mode.
During connecting:
– check if the Bluetooth component is turned on.
– check if the Bluetooth component is within 10 m
(32 feet) of the Bluetooth Wireless Audio
Receiver.
—
Pairing may not have been achieved.
Try pairing again.