Yamaha R-N2000A, Руководство пользователя

Страница: 28 / 150

2
Turn the knob of the speaker jack to the left to loosen it, then insert the core of the
speaker cable into the hole in the jack.
Diameter of hole for inserting speaker cable: 6.0 mm
3
Turn the knob back to the right to tighten it.
CAUTION
(
If the knob of the speaker jack is loosened too far, it will detach from the product. Be careful if a knob comes off, as a child may
swallow it by accident.
(
Do not touch the speaker jacks while this product is ON. Doing so may result in electrical shock.
NOTICE
(
When preparing the speaker cable, do so far away from the product. Pieces of the core wires of the speaker cable may fall inside
the product and cause a short circuit, resulting in malfunction.
(
If the speaker jacks come in contact with a metal rack, they may cause a short circuit, resulting in damage to the product. Leave
plenty of space when installing the product so the speaker jacks do not touch the rack.
(
Do not allow the core wires of a speaker cable to touch the core wires of another speaker cable or any metal parts of the
product. Doing so may damage the product and/or the speakers.
NOTE
Be sure to connect to the jacks correctly: left channel (L), right channel (R) and + (red), - (black). If connected incorrectly, no audio may
be output from the speakers. Also, if the polarity is wrong, the audio may sound strange.
n
Connecting via banana plug (Models for U.S.A., Canada, China and Taiwan)
When using a banana plug, tighten the knob of the speaker terminal and insert a banana plug into the end of
the terminal.
NOTE
In some selling areas, connecting via banana plugs may not be available. In that case, use the connections via Y-shaped lugs.
28
PREPARATION > Connecting speakers