9
En
glish
3
Press SELECT on the front panel to start the automatic adjustment of speaker settings with YPAO.
Adjustment starts automatically after about 10 seconds. It takes about 1 minutes.
Do not make any unnecessary noise until the adjustments are complete.
4
Check the results on the front display.
After all adjustments are complete, the results are shown on the front display. Follow the instructions that are
displayed, and use the SELECT buttons to complete adjustments.
If an error message or warning message appears on the
display, refer to the User Guide.
5
Save the YPAO results.
Check the following display, and press SELECT to save the adjustment results.
6
Remove the YPAO microphone from the YPAO MIC jack.
After checking the following display, disconnect the YPAO microphone.
This completes the YPAO settings.
ALANCE
LOUDNESS
VOLUME
FLAT
-30dB
PURE DIRECT
PRESET
RETURN
CONNECT
PUSH - ENTER
SELECT
R
PUSH - ENTER
SELECT
If there are no errors or warnings:
This prompts you to press SELECT to go to the next step.
https://manual.yamaha.com/av/22/rn1000a/q1ypao.html
User Guide
"E-" means error.
"W-" means warning.
To cancel or readjust (Retry), turn SELECT to choose the desired item.
