Yamaha QS300, Дополнительное руководство

Страница: 46 / 56

45
MIDI Data Format
(3-3-2) SONG SELECT
STATUS 11110011(F3H)
SONG NO 0vvvvvvv v = 0 - 9
Transmitted during SONG PLAY MODE to change the song.
Receivable during SONG PLAY MODE standby.
(3-4) SYSTEM REALTIME MESSAGE
Not recorded as sequence data.
(3-4-1) TIMING CLOCK
STATUS 11111000(F8H)
Selects timing clock from (a) internal clock, (b) clock signal received over MIDI In.
Sending and receiving can be enabled/disabled.
(3-4-2) START
STATUS 11111010(FAH)
Transmission, reception can be enabled/disabled.
(3-4-3) CONTINUE
STATUS 11111011(FBH)
Transmission, reception can be enabled/disabled.
(3-4-4) STOP
STATUS 11111100(FCH)
Transmission, reception can be enabled/disabled.
(3-5) SYSTEM EXCLUSIVE MESSAGE
All exclusive messages are recorded/replayed.
Regardless of any time lags during reception, all message content (from F0 through F7) is recorded with equal time between bytes. For replay, intervals can be interposed after every 1Kbytes.
<Table 1-1>
Parameter Base Address
Parameter Change
Address
(H) (M) (L) Description
SYSTEM 00 00 00 System
00 00 7D Drum Setup Reset
00 00 7E XG System On
00 00 7F All Parameter Reset
INFORMATION 01 00 00 System Information
EFFECT 1 02 01 00 Effect1(Reverb,Chorus,Variation )”
02 40 00 Reserved
: : : :
MULTIPART 08 00 00 Multipart 1
:
08 0F 00 Multipart 16
08 10 00 Reserved
: : : :
DRUM 30 18 00 Drum Setup 1 Address Parameter
31 18 00 Drum Setup 2 : :
3n 18 00 note number 24
32 18 00 Reserved 3n 19 00 note number 25
: : : : : :
3F nn nn Reserved 3n 54 00 note number 84
<Table 1-2>
MIDI Parameter Change table ( SYSTEM )
Address Size Data Parameter Name Description Default
(H) (H) (H) value(H)
00 00 00 4 0000 Master Tune -102.4..+102.3[cent] 00 04 00 00
01 ..07FF 1st bit3-0
→
bit15-12 (0400)
02 2nd bit3-0
→
bit11-8 (Not reset by
03 3rd bit3-0
→
bit7-4 XG ON, GM ON)
4th bit3-0
→
bit3-0
04 1 00..7F Master Volume 0..127 7F
05 1 00..7F not used
06 1 28..58 Transpose -24..+24[semitones] 40
7D n Drum Setup Reset n=Drum Setup Number
7E 00 XG System On 00=XG Sytem on (receive only)
7F 00 All Parameter Reset 00=on (receive only)
TOTAL SIZE 06
>