Yamaha PZ50RTX Скачать руководство пользователя страница 28

Страница: 28 / 92

Control functions

To install the storage pouch
1.

Fasten the storage pouch upper buckles.

Pass the storage pouch lower strap be-
tween the bracket and the frame, and
then fasten the buckle to secure the
pouch.

NOTE:

●

Be sure to route the storage pouch lower
strap above the bracket fasteners.

●

When installing the storage pouch, make
sure that the storage pouch buckles are se-
curely fastened.

Storing the spare V-belt (PZ50RT /
PZ50GT / PZ50MT)

Keep a spare V-belt for emergency use by
storing it in the storage pouch.

NOTE:

When storing a spare V-belt in the storage
pouch, be sure to secure it with the hook and
loop fastener.

ESU10840

Rear carrier (PZ50VT)

The rear carrier is located at the rear of the
snowmobile.

WARNING

EWS00140

Do not use the rear carrier to lift the snow-
mobile. The snowmobile could fall, which
could result in severe injury or death.

1. Storage pouch buckle

1. Storage pouch lower strap

2. Storage pouch
3. Bracket fastener

1. Hook and loop fastener

1. Rear carrier

Maximum load limit:

20 kg (44 lb)

U8GK11E0.book Page 22 Wednesday, April 11, 2007 9:51 AM

Содержание PZ50RTX





























































































Результаты поиска

Содержание PZ50RTX

Отзывы:

Yamaha PZ50RTX, Руководство пользователя, Страница: 28 / 92

Результаты поиска

Содержание PZ50RTX

Отзывы: