Panel Operation
— CONFIG WIZARD screen (Advanced mode)
22
PX10/PX8/PX5/PX3 Reference Manual
Using the Configuration Wizard here enables you to easily set more advanced functions.
WIZARD MODE
Select a parameter status to start settings.
• EDIT CONFIG:
Changing the current setting
• NEW CONFIG:
Making a new setting
SP TYPE (speaker type)
Selects a combination of speakers for connection.
• FULL+FULL:
When connecting full-range speakers to the [SPEAKERS] terminals of both channels A
and B.
• SUB+SUB:
When connecting subwoofers to the [SPEAKERS] terminals of both channels A and B.
• FULL+SUB:
When connecting a full-range speaker to the [SPEAKERS] of channel B and a subwoofer
to channel A.
• BI-AMP:
When connecting low range of a bi-amp speaker to the [SPEAKERS] of channel A and
high range to channel B.
• FULL (MONO):
When connecting a full-range speaker driven in Power Boost mode to the [SPEAKERS]
terminal of channel A (PX5 and PX3 only).
• SUB (MONO):
When connecting a subwoofer driven in Power Boost mode to the [SPEAKERS] terminal
of channel A (PX5 and PX3 only).
CONFIG WIZARD screen (Advanced mode)
WARNING
The volume changes depending on the setting. Carry this out with the volume lowered for
safety.
NOTE
To return to a previous parameter setting, press the [
] (back) key.
NOTE
Refer to
“PX amplifier available system configurations” (page 6)
for details on combinations listed
in
.
