14
Display unit
The display unit offers the following operations and infor-
mation displays.
2
Installing the battery
The display needs to be removed and installed for chang-
ing the battery.
• Remove the two bolts on back side of the clamp, and
then remove the display.
• When installing the display, tighten the two display
bolts from the back side of the clamp.
WARNING
Tighten the display bolts to 1.5–2.5 N·m. During rid-
ing, vibration could cause the bolts to come loose
with the risk that the display may fall off.
TIP
• The clamp and display might be installed on the right
side of the stem.
• For models without this clamp, the above note does not
apply.
2
Battery
Check if the rated battery (CR2032) is installed in the rear
of the display.
If a battery is not installed, or if there is not sufficient bat-
tery power remaining, install a new battery.
To adjust the time and set the units for distance and
speed, see “Stopwatch and settings”.
TIP
• Make sure that the waterproof seal is installed correct-
ly.
• Use a new type CR2032 button cell battery (sold sepa-
rately).
• When a battery becomes empty, whenever it turns on
the vehicle power supply, the clock begins to count
from 11:00. Please replace the battery, if such a condi-
tion appears.
INSTRUMENT AND CONTROL FUNCTIONS
Clamp
Display bolt
Close
Cover
Waterproof seal
Battery
