background image

8

PSR-SX900/SX700  Reference Manual

The Chord Fingering type determines how chords are specified for Style Playback. You can select the desired type on 
the display called up via [MENU] 

 [Split & Fingering].

Changing the Chord Fingering Type

Single Finger

Makes it simple to produce orchestrated accompaniment using major, seventh, minor and minor-
seventh chords by pressing only one, two or three keys on the Chord section of the keyboard.

Multi Finger

Automatically detects Single Finger or Fingered chord fingerings, so you can use either type of fin-
gering without having to switch fingering types.

Fingered

Lets you specify the chord by pressing the notes making up a chord in the left hand section of the 
keyboard when ACMP is turned on or the Left part is turned on. For information on which notes to 
press for each chord, refer to the Data List (Chord Types Recognized in the Fingered Mode) down-
loadable from Yamaha Manual Library, or use the Chord Tutor function as described in the next 
section.

Fingered On Bass

Accepts the same fingerings as Fingered; however, the lowest note played in the Chord section of 
the keyboard is used as the bass note, allowing you to play “on bass” chords. (In the Fingered type, 
the root of the chord is always used as the bass note.)

Full Keyboard

Detects chords in the entire key range. Chords are detected in a way similar to Fingered, even if you 
split the notes between your left and right hands—for example, playing a bass note with your left 
hand and a chord with your right, or by playing a chord with your left hand and a melody note with 
your right.

AI Fingered

Basically the same as Fingered, with the exception that less than three notes can be played to indi-
cate the chords (based on the previously played chord, etc.).

AI Full Keyboard

This type is similar to Full Keyboard, with the exception that less than three notes can be played to 
indicate the chords (based on the previously played chord, etc.). 9th, 11th and 13th chords cannot 
be played.

• “AI” stands for “Artificial Intelligence.”
• When the chord detection area is set to “Upper,” only “Fingered*” is available. This type is basically same as “Fingered,” except that “1+5,” “1+8” and Chord Cancel are 

not available. 

Cm

C

Cm

7

C

7

Major chord

Press the root key only.

Minor chord

Simultaneously press 
the root key and a black 
key to its left.

Seventh chord

Simultaneously press the 
root key and a while key to 
its left.

Minor Seventh chord

Simultaneously press the root 
key and both a white and black 
key to its left. 

NOTE

Содержание PSR-SX700












































































































































Отзывы: