Yamaha PSG-01S, Руководство пользователя

Страница: 5 / 24

5
OP
ERA
T
IO
N
S
By standing this unit, you can use this unit as a microphone speaker for Skype. This state is called "Active style".
y
For more information about Skype, visit the following website.
Skype website: http://www.skype.com/
To use this unit with Skype, you need to carry out the
following setup procedure. For further information, refer
to "Quick Start Guide" supplied with this unit.
1
Connect the PC/Mac to the Internet.
2
Connect this unit to the PC/Mac using
the supplied U
S B cable.
3
Install S kype.
4
Install the P S G-01 S Controller and then
run the P S G-01 S Controller.
5
On S kype, permit access from the P S G-
01 S Controller.
appears in the task tray/menu bar. The setup is
complete.
When appears in the task tray/menu bar, you cannot access
Skype from the PSG-01S Controller. To use this unit with Skype,
permit access from the PSG-01S Controller on Skype.
1
S tand this unit on a flat surface.
y
This unit rings the Style-shift sound (chimes) when the
installation style is changed. If the Style-shift sound does
not ring or if the error sounds (buzzer sounds) are output,
reinstall this unit properly.
2
S pecify a phone number to call.
3
Press (off-hook).
The phone call starts.
4
S tart a conversation.
Adjust the speaker volume if necessary.
5
Press (on-hook).
The call ends.
1
While receiving an incoming call, stand
this unit on a flat surface and then press
(off-hook).
2
S tart a conversation.
Adjust the speaker volume if necessary.
3
Press (on-hook).
The call ends.
Communication
Setup
Note
Making a call
Accepting an incoming call