Yamaha PRO/Mark IV, Руководство по эксплуатации для продвинутых пользователей

Страница: 81 / 121

CHAPTER 6: Other Settings
68
Englis
h
If you want to return your Disklavier to its initial factory
settings, follow the procedure below.
You can assign the ONE TOUCH button on the cradle a
series of procedures for an often used function. The
followings are the available functions.
[REC]:
Sets the Disklavier in recording mode. (
→
pg. 43)
[Performance]:
Turns on the Performance function. (
→
pg. 39)
[Standby]:
Turns off the Disklavier. (
→
pg. 6 in
“Quick Guide”)
The piano diagnostics may be required as the occasion
demands. In such a case, follow the instructions of your
Yamaha dealer and perform the following procedure.
Resetting the Disklavier
1
Tap on in the [Main] screen,
and then on .
2
Tap on .
3
Tap on to start resetting.
4
Tap on to complete the
operation.
Assigning a Specific Function
to the ONE TOUCH Button
1
Tap on in the [Main] screen,
and then on .
2
Tap on [Function], press to select
the desired option, and then on
.
3
Tap on to complete the
operation.
Tap to cancel resetting.
To inactivate the ONE TOUCH button,
select
[No Function] in step
2
.
Diagnosing the Disklavier
1
Tap on [Service Center] in the
[PRC-100 Menu] screen.
2
Tap on the desired option, and then
follow the instructions that appears
on the screen.
3
Tap on to return to the [PRC-100
Menu] screen.