8. Rhythm Receive Channel
Selection
This function is used to select the
MIDI receive channel that will be used
to receive rhythm data (the channel
selected using the MIDI Channel
Selection function described earlier
applies to non-rhythm parts and
voices). The Rhythm Receive Channel
must be matched to the transmit
channel of the device from which the
rhythm data is to be received.
* lf the assigned Rhythm Receive
Channel is the same as a channel
assigned for reception of non-rhythm
data, the rhythm data takes priority.
*
When the power switch is turned
ON, the Remote Control Mode is
selected and the OMNI OFF +
receive channel 1 mode is selected.
lf the Standard Voice Mode is then
selected, this function is
automatically set to channel 16.
*
This function has no effect if the
Remote Control Mode is selected.
MIDI Error Display
During MIDI reception, if the data cannot be
properly transferred or the amount of data
transferred exceeds the capacity of the transmit/
receive buffer, the following MIDI error display
will appear.
If this occurs, try turning the power switch OFF
and then ON again. If the problem is caused by
a buffer overflow, the data rate or amount of data
sent should be reduced until the problem
disappears.
54