Yamaha POCKETRAK W24, Руководство пользователя

Страница: 21 / 36

POCKETRAK W24 Owner’s Manual
21
Quick Guide
Simple recording (musical prac-
tice, meeting, etc.)
Before recording, set the [ALC] switch to
[ON] and the [MIC SENS] (microphone sensi-
tivity) switch to [HIGH].
1.
Point the built-in stereo microphone
toward the sound source, then press
the [REC/PAUSE
] button.
The LED lights up in red and recording
begins.
Hint:
· If the recording level is too high (see page 22),
set the [MIC SENS] (microphone sensitivity)
switch (located on the side panel) to [LOW].
2.
Press the [STOP/ESC ] button to stop
recording.
The LED turns off and the unit displays
the main screen.
Note:
· Press the [REC/PAUSE ] button again to pause
recording. Press the [REC/PAUSE ] button
again to resume recording.
Recording a musical perfor-
mance
Before recording, set the [ALC] switch to
[OFF] and the [MIC SENS] (microphone sen-
sitivity) switch to [LOW].
1.
Point the built-in stereo microphone
toward the sound source, then press
the [REC/PAUSE
] button.
The unit enters recording [STANDBY]
mode. The LED indicator flashes slowly in
red. Recording has not started yet.
Note:
· The level meter will move left or right in
response to the sound level from the micro-
phone.
V OL
ME N U
E N TER
SPEED PAUSE ESC
PLAY STOP REC
MIC
SENS
HIGH
LO
W
ON
OFF
ALC
Built-in stereo
microphone
V OL
ME N U
E N TER
SPEED PAUSE ESC
PLAY STOP REC
HIGH
LO
W
ON
OFF
ALC
MIC
SENS
–30dB
3:02
091101_1712.WAV
STANDBY
0:00:00
20
44.1K PCM
A
16bit
L
L
R
Level meter