ENGLISH
21
Editing VL Voice Part Parameters
ThrCtrlDpt (Throat Formant Control Depth) ....................... Settings: -64 … +63
Sets the amount of variation produced by the controller assigned to throat formant.
The higher the value the greater the variation. Positive values cause an increase in
throat formant effect in response to higher controller values (e.g. increased breath pres-
sure or higher modulation wheel position), while minus values cause a decrease in
throat formant effect in response to higher controller values.
9. Harmonic Enhancer
Hrm CC No. (Harmonic Enhancer Control Change Number) ..Settings: off … 95, AT, VEL, PB
The Harmonic Enhancer can vary the harmonic structure of the sound over a wide
range. The “Hrm CC No.” parameter specifies the controller to be used for harmonic
enhancer depth (wet/dry balance) control. When set to “off” no harmonic enhancer
depth variation can be applied via a controller.
• Since most VL voices have sufficient natural harmonic content, the Harmonic Enhancer is actually only
used on a few voices. Therefore changing the controller destination with many voices will produce either no
change in the sound or a simple change in amplitude.
HrmCtrlDpt (Harmonic Enhancer Control Depth) ............... Settings: -64 … +63
Sets the amount of variation produced by the controller assigned to the harmonic en-
hancer. The higher the value the greater the variation. Positive values cause an in-
crease in harmonic enhancer depth in response to higher controller values (e.g. in-
creased breath pressure or higher modulation wheel position), while minus values cause
a decrease in harmonic enhancer depth in response to higher controller values.