background image

Consumer information

85

ESU12500

YAMAHA MOTOR CORPORATION, U.S.A. SNOWMOBILE LIMIT-
ED WARRANTY

Yamaha Motor Corporation, U.S.A. hereby warrants that
new Yamaha snowmobiles purchased from an autho-
rized Yamaha snowmobile dealer in the continental United
States will be free from defects in material and workman-
ship for the period of time stated herein, subject to certain
stated limitations.

WARRANTY PERIOD:

1. All Yamaha snowmobiles shall be warranted for a

term of one (1) year from the date of purchase, plus
a special early-season extension (if applicable).

2. All Yamaha snowmobile clutch components are war-

ranted against abnormal wear for one (1) year from
the date of purchase, plus a special early-season
extension (if applicable).

DURING THE PERIOD OF WARRANTY

 any au-

thorized Yamaha snowmobile dealer will, free of charge,
repair or replace, at Yamaha’s option, any part adjudged
defective by Yamaha due to faulty workmanship or
material from the factory. Parts used in warranty repairs
will be warranted for the balance of the snowmobile’s
warranty period. All parts replaced under warranty be-
come the property of Yamaha Motor Corporation, U.S.A.

GENERAL EXCLUSIONS

 from this warranty shall

include any failures to the machine caused by:
1. Competition, racing, or non-Yamaha authorized rental

use.

2. Operation on surfaces other than snow or ice.
3. Installation of parts or accessories that are not qual-

itatively equivalent to genuine Yamaha parts.

4. Abnormal strain, neglect, or abuse.
5. Lack of proper maintenance.
6. Accident or collision damage.
7. Modification to original parts.

SPECIFIC EXCLUSIONS

 from this warranty shall

include parts replaced due to normal wear or routine
maintenance including oil, spark plugs, clutch drive belts,
slide runners, and track.

THE CUSTOMER’S RESPONSIBILITY

 under this

warranty shall be to:
1. Operate and maintain the snowmobile as specified in

the appropriate Owner’s Manual.

2. Give notice to an authorized Yamaha snowmobile

dealer of any and all apparent defects within ten (10)
days after discovery, and make the machine avail-
able at that time for inspection and repairs at such
dealer’s place of business. You may locate your
nearest authorized Yamaha dealer through your
local telephone directory.

WARRANTY TRANSFER:

 To transfer any remain-

ing warranty from the original purchaser to any subse-
quent purchaser, it is imperative that the machine be
inspected and registered for warranty by an authorized
Yamaha snowmobile dealer. In order for this warranty
to remain in effect, this inspection and registration must
take place within ten (10) days after ownership transfer.
An inspection and registration fee will be charged for this
service.

EMISSION CONTROL SYSTEM WARRANTY

Yamaha Motor Corporation, USA also warrants to the
ultimate purchaser and each subsequent purchaser of
each 2006 and later model Yamaha snowmobile cov-
ered by this warranty that the vehicle is designed, built,
and equipped so as to conform at the time of sale with
all U.S. emissions standards applicable at the time of
manufacture and that it is free from defects in materials
and workmanship which would cause it not to meet
these standards within the period listed immediately
below. Failures other than those resulting from defects
in material or workmanship which arise solely as a
result of owner abuse and/or lack of proper mainte-
nance are not covered by this warranty.

All Models

Thirty (30) months from the original purchase date

U8GK12E0.book  Page 85  Monday, May 19, 2008  11:17 AM

Содержание Phazer PZ50Y



































































































Отзывы: