Song Playback
PF-1000
76
Playing Back Songs on Disk
Insert the disk into the drive.
The method for playing back is the same as in the “Playing the Internal Songs” instructions
(page 74), except that you should select
FLOPPY DISK
page in the
SONG
display.
Other Playback-related Operations
■
Repeat / Rewind / Fast forward
■
Adjusting the Volume Balance / Muting Specific Channels
CHANNEL ON/OFF display
Select the
[SONG]
tab with the
[CHANNEL ON/OFF]
button, and mute the desired channel
by setting it to
[OFF]
. To
solo
a channel (only that channel will sound), hold down the
appropriate button corresponding to the channel. To release the solo for the channel, press
that channel’s button again.
Before proceeding, make
sure to read the section
“Handling the Floppy Disk
Drive (FDD) and Floppy
Disk” (page 6).
n
You can set whether or not
the PF-1000 automatically
calls up the first disk song
when a disk is inserted
(page 139).
n
Some song data for the PF-
1000 has been recorded
with special “free tempo” set-
tings. During playback of
such song data, the mea-
sure numbers shown in the
display will not correspond to
the actual measure; this only
serves as a reference as to
how much of the song has
been played back.
n
Songs containing a large
amount of data may not be
able to be read properly by
the instrument, and as such
you may not be able to
select them. The maximum
capacity is about 200–
300KB, however this may
differ depending on the data
contents of each song.
Insert the disk shutter side
first and label face up.
TOP
REC
NEW SONG
SYNC.START
START/STOP
REW
FF
REPEAT
SONG
During playback, you can have the song return to the top and play back again
from the beginning by pressing this button. When playback is stopped,
pressing this button returns the song to the beginning.
Press this button to call up the
SONG POSITION
display (see below). To return to the
SONG
display,
press the
[EXIT]
button.
When “
BAR
” is selected, you can specify a measure number (counted from the
beginning of the song) by using the
[REW]
and
[FF]
buttons.
When “
PHRASE MARK
” is selected, specify the phrase mark number by using the
[REW]
and
[FF]
buttons.
Phrase Mark
This data specifies a certain
location in the song data.
SONG POSITION display
“
PHRASE MARK
” is shown only when the song contains phrase marks. Press the
[J]
button to toggle between “
BAR
” and “
PHRASE MARK
,” then use the
[REW]
and
[FF]
buttons to select the desired measure or phrase mark.
BALANCE
CHANNEL
ON/OFF
PART
Press this button to call up the
BALANCE
display (page 61).
Press this button to call up the
CHANNEL ON/OFF
display (see below).
Channel
Refers to the MIDI channel
in the song data. The chan-
nels are assigned as shown
below for the PF-1000.
Song
1 - 16
Accompaniment Style
9 - 16