11
ENGLISH
Loading Batteries
1. Open the battery cover.
• Slide back and remove the battery
cover in the direction of the arrow.
2. Load the batteries.
• Load the two Size AA batteries included, matching polarity
markings on the batteries to those on
the case.
3. Close the battery cover.
• Replace the battery cover in the
direction of the arrow and snap it back
into place.
Handling the Remote Control
Use the remote control within 5m from the front of the unit, within a
30 degree arc either side of the remote control sensor.
CAUTION
• Do not use new and old batteries together. The batteries could
explode or leak, resulting in fires, physical injury, or stains.
• When loading batteries, observe their correct polarities as
marked on the product. If loaded in the wrong direction, the
batteries could explode or leak, resulting in fires, physical injury,
or stains.
ATTENTION
• Do not drop or exert undue force on the remote control.
• To avoid possible failures. Do not splash the remote control with
water or put it on a wet object.
• If you do not intend to use the remote control for an extended
period of time, remove the batteries from it.
• If the remote control begins to lack responsiveness, replace the
batteries.
• Strong light such as direct sunlight impinging on the
photoreceptor of the remote control can cause operational
failure. Position this unit to avoid direct contact with such light.
COMPONENT NAMES (continued)
Remote control
AV1
AV2
RGB 1
RGB 2
AV3
MUTE
VOL
AV4
AUTO
P
IN
P
OK
SIZE
RECALL
MENU
ID
ID SET
15
POWER OFF button
15
POWER ON button
MUTE button
RGB/VIDEO buttons
P
IN
P button
AUTO button
MENU button
OK button
ID button
15
16
16
18
32
32
32
32
16
17
18
18
32
POWER ON/OFF button
VOLUME UP/DOWN buttons
SIZE button
RECALL button
RETURN button
SELECT/ADJUST button
ID SET button
With in 30
degrees
About 5m
About 3m
With in 30
degrees
About 3m
AV1
AV2
RGB 1
RGB 2
AV3
MUTE
VOL
AV4
AUTO
P
IN
P
OK
SIZE
RECALL
MENU
ID
ID SET
32
012_PDM-5520_U_E
12/13/04, 9:23 AM
11
