P-250
12
12.
Front Rail Assembly
(Time required: about 10 minutes)
12-1
Open the control panel unit. (See procedure 1.)
12-2
Remove the eight (8) screws marked [230] under the
keybed. The front rail assembly with the keyboard holder
can then be removed. (Fig. 15)
12-3
Remove the three (3) screws marked [250G]. The keyboard
holder can then be removed from the front rail assembly.
(Fig. 15)
13.
Keyboard Assembly
(Time required: about 10 minutes)
13-1
Open the control panel unit. (See procedure 1.)
13-2
Remove the nine (9) screws marked [200], the two (2)
screws marked [210] and the screw marked [770]. The key-
board assembly can then be removed. (Fig. 16)
Fig. 15
(図
15
)
[230]: Bind Head Tapping Screw-1 3.5 x 14 MFZN2BL (EP030250)
+バインド
TP1
種
[250G]: Bind Head Tapping Screw-B 3.0 x 6 MFZN2Y (EP600130)
+バインド
B
タイト
[250G]
x 3
Front rail assembly
(口金
Ass'y
)
Keyboard holder
(鍵盤前金具
Ass'y
)
<Bottom view>
(底面)
<Side view>
(側面)
[230]
[230]
Fig. 16
(図
16
)
[200]: Pan Head Screw B+PW 5.0 x 25 MFZN2Y (VV040700)
+ナベ小ネジ
[210]: Bind Head Tapping Screw-1 4.0 x 14 MFZN2Y (EP040230)
+バインド
TP1
種
[770]: Truss Head Tapping Screw-1 3.5 x 14 MFZN2Y (EN630230)
+トラス
TP1
種
[200]
[210]
Keyboard assembly
(
GHD-EBUS
鍵盤)
[210]
[200]
[770]
[200]
12.
口金 Ass'y
(所要時間:約 10 分)
12-1
CP ユニットを開けます。
(1 項 参照)
12-2
棚板下側から、[230]のネジ 8 本を外し、鍵盤前金具
Ass'y と一緒に口金 Ass'y を外します。
(図 15)
12-3
[250G]のネジ 3 本を外し、口金 Ass'y から鍵盤前金具
Ass'y を外します。
(図 15)
13.
GHD EBUS 鍵盤 Ass'y
(所要時間:約 10 分)
13-1
CP ユニットを開けます。
(1 項 参照)
13-2
[200]のネジ 9 本、
[210]のネジ 2 本、[770]のネジ 1 本を
外し、GHD EBUS 鍵盤 Ass'y を外します。
(図 16)