P-200
22
3-10. (A) 32 Sound Output & Wave ROM Test
When the [C4] key is pressed, sine wave signals will
sound in succession from channel 1 through channel
32.
3-11. (B) 32 Sound Output & Wave ROM Test
When the [D4] key is pressed, sine wave signals will
sound in succession from 1-channel through 32-
channel.
3-12. RAM Test
Pressing the [C5] will activate the RAM test. The LCD
will display "OK" or "NG".
3-13. Start The DEMO Song
Press the [C6] key to start the demonstration song.
3-14. FOOT CONTROLLER, CONTINUOUS
SLIDER Test
Press the [E6] key to execute the FOOT
CONTROLLER and CONTINUOUS SLIDER test.
The LCD will display 0 (minimum) to 127 (maximum)
when you operate the foot controller or the CS slider.
NOTE : Connect the foot pedal [FC7: VR type] to the
FOOT CONTROLLER jack.
3-15. WHEEL Test
Press the [F6] key to execute the PITCH wheel and
MODULATION wheel data entry tests. The LCD will
display 0 to 127 when you move the wheel.
3-16. PANEL EQ. Test
Press the [G6] key to execute the PANEL EQ. test. The
LCD will display -15 (minimum) to 0 (center) to +15
(maximum) when you operate an EQUALIZER slider.
3-17. BATTERY Test
Press the [B6] key to execute the battery test.
Check that the voltage of the battery is between 2.8 V
and 3.45 V.
3-18. Program ROM Version Display
When the [C7] key is pressed, the version number of
the MAIN PROGRAM ROM will appear on the LCD.
4.
KSN IC Test
When turning the POWER switch on, the KSN IC test
can be executed. If the test is NG, "NG" will be
indicated on the LCD.
5.
INITIALIZATION
While pressing the MIDI and EDIT buttons, turn on
the POWER switch of the P-200; memorized data will
be initialized.
