Yamaha NXN500BL Скачать руководство пользователя

Страница: 35 / 41

APPENDIX

Bluetooth

Remote control

Problem

Cause

Remedy

See

page

Cannot make the unit paired

with the

Bluetooth

device.

Wireless switch is set to “OFF”.

Set it to “AUTO”.

The device does not support A2DP.

Perform paring operations with a device which

supports A2DP.

—

The unit and device are too far apart.

Position the

Bluetooth

device so that it is less than

10 m (33 ft) from this unit and pair the device with

this unit.

—

There is a device (microwave oven, wireless LAN,

etc.) outputs signals in the 2.4 GHz frequency band

nearby.

Move this unit away from the device that is

emitting radio frequency signals.

—

Another

Bluetooth

device is connected.

Disconnect current

Bluetooth

connection, and

perform pairing with the new device.

Bluetooth

is not selected as the input source.

Select

Bluetooth

as the input source.

Bluetooth

adaptor, etc. that you want to pair with

the unit has a password other than “0000”.

Use a

Bluetooth

adaptor, etc. whose password is

“0000”.

Cannot make a

Bluetooth

connection.

Wireless switch is set to “OFF”.

Set it to “AUTO”.

Another

Bluetooth

device is connected.

The unit cannot make multiple

Bluetooth

connections. Disconnect current

Bluetooth

connection, and make connection for the desired

device.

More than 20 devices are paired and the oldest

pairing information is deleted.

Perform pairing again. This unit can be paired with

a maximum total of 20

Bluetooth

devices for

reception and transmission. When the 21st device

is registered, the least frequently used pairing

information is deleted.

No sound is produced or the

sound is intermittent during

playback.

The

Bluetooth

connection of the unit with the

device is disconnected.

Perform

Bluetooth

connection operations again.

The unit and device are too far apart.

Move the

Bluetooth

device so that it is less than

10 m (33 ft) from this unit.

—

There is a device (microwave oven, wireless LAN,

etc.) outputs signals in the 2.4 GHz frequency band

nearby.

Move this unit away from the device that is

emitting radio frequency signals.

—

The device’s

Bluetooth

function is off.

Enable the

Bluetooth

function of the device.

—

The device’s volume is set to minimum.

Turn up the volume level on the device.

—

Problem

Cause

Remedy

See

page

The remote control does not

work and/or function

properly.

The wrong distance or angle.

The remote control functions within a maximum

range of 6 m (20 ft) and no more than 30 degrees

off-axis from the front panel.

Direct sunlight or lighting (from an inverter type of

fluorescent lamp, etc.) is striking the remote

control sensor of this unit.

Reposition this unit.

—

The batteries are weak.

Replace all batteries.

Содержание NXN500BL










































Результаты поиска

Содержание NXN500BL

Отзывы:

Похожие инструкции для NXN500BL

Бренды по названию

Популярные бренды

Yamaha NXN500BL, Руководство пользователя

Результаты поиска

Содержание NXN500BL

Отзывы:

Похожие инструкции для NXN500BL

Бренды по названию

Популярные бренды