Yamaha NS-WSW120 Скачать руководство пользователя страница 71

Страница: 71 / 83

TROUBLESHOOTING

➤

Troubleshooting

Bluetooth

Problem

Cause

Remedy

See page

Cannot make the unit paired with
the

Bluetooth

device.

Bluetooth

is not selected as the input source.

Select

Bluetooth

as the input source.

The device does not support A2DP.

Perform paring operations with a device which supports A2DP.

Bluetooth

adaptor, etc. that you want to pair with the unit has a password

other than “0000”.

Use a

Bluetooth

adaptor, etc. whose password is “0000”.

The unit and device are too far apart.

Position the

Bluetooth

device so that it is less than 10 m (33 ft) from this unit

and pair the device with this unit.

There is a device (microwave oven, wireless LAN, etc.) outputs signals in
the 2.4 GHz frequency band nearby.

Move this unit away from the device that is emitting radio frequency signals.

–

Another

Bluetooth

device is connected.

Terminate current

Bluetooth

connection, and perform pairing with the new

device.

Cannot make a

Bluetooth

connection.

Another

Bluetooth

device is connected.

The unit cannot make multiple

Bluetooth

connections. Terminate current

Bluetooth

connection, and make connection for the desired device.

More than nine devices are paired and the oldest pairing information is
deleted.

Perform pairing again. The unit can retain pairing information for up to eight
devices. When pairing a ninth device, the oldest pairing information will be
deleted.

No sound is produced or the
sound is intermittent during
playback.

The

Bluetooth

connection of the unit with the device is disconnected.

Perform

Bluetooth

connection operations again.

The unit and device are too far apart.

Move the

Bluetooth

device so that it is less than 10 m (33 ft) from this unit.

There is a device (microwave oven, wireless LAN, etc.) outputs signals in
the 2.4 GHz frequency band nearby.

Move this unit away from the device that is emitting radio frequency signals.

–

The device’s

Bluetooth

function is off.

Enable the

Bluetooth

function of the device.

–

The device is not set to send

Bluetooth

audio signals to the unit.

Check that the

Bluetooth

function of the device is set properly.

–

Playback on the device has not been performed.

Perform playback on the device.

–

The device’s volume is set to minimum.

Turn up the volume level on the device.

–

Содержание NS-WSW120




















































































Результаты поиска

Содержание NS-WSW120

Отзывы:

Похожие инструкции для NS-WSW120

Бренды по названию

Популярные бренды

Yamaha NS-WSW120, Руководство пользователя

Результаты поиска

Содержание NS-WSW120

Отзывы:

Похожие инструкции для NS-WSW120

Бренды по названию

Популярные бренды