Yamaha NS-WSW120 Скачать руководство пользователя страница 19

Страница: 19 / 83

PREPARATIONS

➤

Installation

If your TV is mounted on a wall, the optional Wall Mount Bracket SPM-K20 can be used
to mount this unit on the wall under the TV.

See “Dimensions” (p. 22) for this unit and SPM-K20 dimensions.

• Be sure to read “SAFETY INSTRUCTIONS” in the Installation Manual supplied with the SPM-K20 before

mounting it.

• The template and screws supplied with the SPM-K20 are not used with this unit.

• SPM-K20 may not be available in some countries or regions.

• Space between this unit and the wall is limited. Therefore, use of a flexible HDMI cable, or right-angle

connector, (neither supplied) is strongly recommended.

❑

Mounting the SPM-K20

Be sure that there is enough space on the wall to mount the wall mount bracket and this
unit. Follow the instructions below to mount both.

Attach the three supplied pads to the wall mount bracket as shown in
the illustration.

Mounting the center unit on a wall

YSP-CU2500

SPM-K20

10.8 mm

28 mm

Flexible HDMI cable or

right-angle connector

Follow instructions provided from this page through page 22.

Содержание NS-WSW120




















































































Результаты поиска

Содержание NS-WSW120

Отзывы:

Похожие инструкции для NS-WSW120

Бренды по названию

Популярные бренды

Yamaha NS-WSW120, Руководство пользователя

Результаты поиска

Содержание NS-WSW120

Отзывы:

Похожие инструкции для NS-WSW120

Бренды по названию

Популярные бренды