4
SETTING UP THE SPEAKERS
You can mount the speakers on a wall. To mount the speakers on a wall, use the holes of the brackets attached on the back
panels of the speakers.
1
Fasten two screws into a firm wall or wall
support at the interval shown below.
2
Hang the speaker by mounting the holes on
the protruding screws.
Make sure that the screws are securely affixed by the
narrow parts of the holes.
•
Each speaker weighs as follows
........................................................................... 1.4 kg
•
Do not mount the speakers on thin plywood or a
wall composed of a soft surface material. If
mounted, the screws may pull out of the flimsy
surface and the speakers may fall. This may
damage the speakers or cause personal injury.
•
Do not affix the speakers to a wall using nails,
adhesives, or any other unstable hardware. Long-
term use and vibrations may cause the speakers to
fall.
•
To avoid accidents resulting from tripping over
loose speaker cables, fix the cables to the wall.
•
Select an appropriate position on the wall to mount
the speaker so that no one will injure his/her head
or face.
Mounting the speakers on the wall (NX-E440)
Rear view
Holes
Tapping screw
(Available at the
hardware store)
Diam. 3.5 to 4 mm
Min. 20 mm
Wall/Wall support
40 mm
4 mm
Caution
40 mm
000_EN_book_NS-P440_446_RTL.book Page 4 Wednesday, November 30, 2005 6:58 PM
