E-
2
The speakers can be mounted on a wall by using the
bracket attached to the speakers’ back panels.
Make sure that the screws are caught by a narrow
part of the holes securely.
Put the screws into a wall according to the figure
shown below.
䡵
Mounting the effect speakers on the wall
Holes
Pads
Fasten screws into a firm wall or wall support as
shown in the figure below, and hang the holes on the
protruding screws.
WARNING
●
Each speaker weights 2.3 kg. Do not mount
them on thin plywood or soft wall surface
material, as the screws may come out of the
flimsy surface, causing the speakers to fall
down and be damaged, or result in personal
injury.
●
Do not fasten the speakers to wall with nails,
adhesives, or other unsound hardware. Long
term use and vibrations may cause them to fall
down.
●
To avoid accidents resulting from tripping over
loose speaker cords, fix them to the wall.
40 mm
Diam. 3.5 to 4 mm
Min.
12 mm
3 mm
Tapping screw
(available at a
hardware store)
Wall or wall
support
You can also use the screw holes on the bottom of the
NS-E8800 for installing the speakers on commericially
available speaker stands (if you do not use the provided
mounting brackets.)
* Before installing, please refer to the instruction manual
of the speaker stand.
NS-C8800-E8800(02.7.10)
02.7.11, 10:03 AM
2
