background image

E-

5

English

The front cover is fastened to the enclosure at six points
and can be removed if desired. To remove the cover, hold
on to both sides and slowly pull straight away from the
speaker. To reattach, line up the six holes on the inner
surface of the cover with the six corresponding pegs on the
speaker and push gently.

Note:
When the cover is removed, take care not to touch the
speaker units with your hands or to exert excessive
force with tools.

SPECIFICATIONS

Type ............................. 3-way bass reflex speaker system

Magnetic shielding type

Driver ................................... 16 cm (6.5”) cone woofer x 1

16 cm (6.5”) mid-range x 1

3 cm (1”) dome tweeter

Impedance ................................................................... 6 

Frequency Response ................... 35 Hz to 50 kHz (-10dB)

Nominal Input Power .................................................. 45 W

Maximum Input Power ............................................. 200 W

Sensitivity .................................................. 89 dB/2.83 V/m

Crossover Frequency ................................. 500 Hz/3.8 kHz

Dimensions (with stands)(WxHxD)

................................................. 324 x 1010 x 380.1 mm

(12-3/4” x 39-3/4” x 14-15/16”)

Weight ............................................. 23 kg (50 lbs.11.3 oz.)

• Specifications subject to change without notice due to

product improvements.

• Care should be taken not to exceed the input power

values noted above.

REMOVING THE FRONT COVER

 Using as 2ch stereo speakers

Better stereo images will be obtained when the speakers
are slightly angled in towards the listeners.

 Using as front speakers in a multi channel

system

Position the speakers on both sides of the TV. The
positioning of speakers is important, because it controls the
whole sound quality of a multi channel system. Set up the
speakers on the basis of your listening position by following
the owner’s manual supplied with your amplifier.

Note:
This speaker features a magnetically shielded design,
but there is still a chance that placing it too close to a
TV set might impair picture color or create a buzzing
noise. Should this happen, move the speaker away from
the TV set.

PLACING THE SPEAKERS

Subwoofer

Center

NS-525F

Surround

Surround
back

Содержание NS-525F






Отзывы: