background image

Safety information

1-2

1

Many accidents involve inexperi-
enced operators. In fact, many op-
erators who have been involved in
accidents do not even have a cur-
rent motorcycle license.

• Make sure that you are qualified

and that you only lend your mo-
torcycle to other qualified oper-
ators.

• Know your skills and limits.

Staying within your limits may
help you to avoid an accident.

• We recommend that you prac-

tice riding your motorcycle
where there is no traffic until you
have become thoroughly famil-
iar with the motorcycle and all of
its controls.

Many accidents have been
caused by error of the motorcycle
operator. A typical error made by
the operator is veering wide on a
turn due to excessive speed or un-
dercornering (insufficient lean an-
gle for the speed).

• Always obey the speed limit and

never travel faster than warrant-
ed by road and traffic condi-
tions.

• Always signal before turning or

changing lanes. Make sure that
other motorists can see you.

The posture of the operator and
passenger is important for proper
control.

• The operator should keep both

hands on the handlebar and
both feet on the operator foot-
rests during operation to main-
tain control of the motorcycle.

• The passenger should always

hold onto the operator, the seat
strap or grab bar, if equipped,
with both hands and keep both
feet on the passenger footrests.
Never carry a passenger unless
he or she can firmly place both
feet on the passenger footrests.

Never ride under the influence of
alcohol or other drugs.

This motorcycle is designed for
on-road use only. It is not suitable
for off-road use.

Protective Apparel

The majority of fatalities from motorcy-
cle accidents are the result of head in-
juries. The use of a safety helmet is the
single most critical factor in the pre-
vention or reduction of head injuries.

Always wear an approved helmet.

Wear a face shield or goggles.
Wind in your unprotected eyes
could contribute to an impairment
of vision that could delay seeing a
hazard.

The use of a jacket, heavy boots,
trousers, gloves, etc., is effective
in preventing or reducing abra-
sions or lacerations.

Never wear loose-fitting clothes,
otherwise they could catch on the
control levers, footrests, or wheels
and cause injury or an accident.

Always wear protective clothing
that covers your legs, ankles, and
feet. The engine and exhaust sys-
tem become very hot during or af-
ter operation and can cause
burns.

A passenger should also observe
the above precautions.

UBD5E0E0.book  Page 2  Wednesday, April 25, 2018  2:23 PM

Содержание NIKEN MXT850











































































































Отзывы: