Yamaha NIKEN MXT850 Скачать руководство пользователя страница 37

Страница: 37 / 106

Instrument an

control functions

3-22

The “

” indicator light flashes when

traction control has engaged. You may
notice slight changes in engine and ex-
haust sounds when the system has en-
gaged.
When the traction control system has
been set to “OFF”, the “

” indicator

light will come on.
The TCS display indicates the current
TCS setting. There are three settings.

TCS “OFF”

TCS “OFF” turns the traction control
system off.

TCS “1”

TCS “1” minimizes traction control
system assist.

TCS “2”

TCS “2” maximizes traction control as-
sist; wheel spin is most strongly con-
trolled.

TIP



When the vehicle is turned on,
traction control is turned on and
set to “1” or “2” (whichever was
last selected).



Turn the traction control system
off to help free the rear wheel if the
vehicle gets stuck in mud, sand, or
other soft surfaces.

NOTICE

ECA16801

Use only the specifie

tires. (See

e 6-16.) Usin

ifferent size

tires will prevent the traction control
system from controllin

tire rotation

accurately.

Settin

the traction control system

WARNING

EWA15441

Be sure to stop the vehicle

efore

makin

any settin

chan

es to the

traction control system. Chan

settin

s while ri

can

istract the

operator an

increase the risk of an

acci

ent.

TCS settings can be changed only
when the vehicle is stopped and the
throttle closed.



Push the “TCS” button to change
between TCS settings “1” and “2”.



Push the button for two seconds
to turn the traction control system
off.



Push the button again to turn trac-
tion control back on (TCS will re-
turn to the previous setting).

Resettin

the traction control sys-

tem

The traction control system will auto-
matically disable when:



a wheel comes off the ground
while riding.

1. “TCS” button
2. TCS display
3. Traction control system indicator light “

”

UBD5E0E0.book Page 22 Wednesday, April 25, 2018 2:23 PM

Содержание NIKEN MXT850











































































































Результаты поиска

Содержание NIKEN MXT850

Отзывы:

Похожие инструкции для NIKEN MXT850

Бренды по названию

Популярные бренды

Yamaha NIKEN MXT850, Руководство пользователя

Результаты поиска

Содержание NIKEN MXT850

Отзывы:

Похожие инструкции для NIKEN MXT850

Бренды по названию

Популярные бренды