Yamaha NIKEN 2019, Руководство пользователя

Страница: 48 / 116

Instrument an d control functions
4-30
4
direction (a). To decrease the rebound
damping force and thereby soften the
rebound damping, turn the adjusting
screw in direction (b).
TIP

When adjusting the damping force
settings, turn the adjuster in direc-
tion (a) until it stops, and then
count the number of turns in direc-
tion (b).

Although a damping force adjust-
er may turn beyond the stated mi-
nimum settings, such adjustments
are ineffective and may damage
the suspension.
WARNING
EWA10222
This shock a b sor b er assem b ly con-
tains hi g hly pressurize d nitro g en
g as. Rea d an d un d erstan d the fol-
lowin g information b efore han d lin g
the shock a b sor b er assem b ly.

Do not tamper with or attempt
to open the cylin
d er assem b ly.

Do not su b ject the shock a b -
sor b er assem b ly to an open
flame or other hi g h heat source.
This may cause the unit to ex-
plo
d e d ue to excessive g as
pressure.

Do not d eform or d ama g e the
cylin d er in any way. Cylin d er
d ama g e will result in poor
d ampin g performance.

Do not d ispose of a d ama g e d or
worn-out shock a b sor b er as-
sem b ly yourself. Take the shock
a b sor b er assem b ly to a Yamaha
d ealer for any service.
1. Rebound damping force adjusting screw
Re b oun d d ampin g settin g :
Minimum (soft):
2 4/5 turn(s) in direction (b)
Standard:
1 1/4 turn(s) in direction (b)
Maximum (hard):
0 turn(s) in direction (b)
(a) (b)
1
UBD510E0.book Page 30 Tuesday, July 17, 2018 1:55 PM