Yamaha NIKEN 2019, Руководство пользователя

Страница: 38 / 116

Instrument an d control functions
4-20
4
The “ ” indicator light flashes when
traction control has engaged. You may
notice slight changes in engine and ex-
haust sounds when the system has en-
gaged.
When the traction control system has
been set to “OFF”, the “
” indicator
light will come on.
The TCS display indicates the current
TCS setting. There are three settings.
TCS “OFF”
TCS “OFF” turns the traction control
system off.
TCS “1”
TCS “1” minimizes traction control
system assist.
TCS “2”
TCS “2” maximizes traction control as-
sist; wheel spin is most strongly con-
trolled.
TIP

When the vehicle is turned on,
traction control is turned on and
set to “1” or “2” (whichever was
last selected).

Turn the traction control system
off to help free the rear wheel if the
vehicle gets stuck in mud, sand, or
other soft surfaces.
NOTICE
ECA16801
Use only the specifie d tires. (See
pa g e 7-17.) Usin g d ifferent size d
tires will prevent the traction control
system from controllin
g tire rotation
accurately.
Settin g the traction control system
WARNING
EWA15441
Be sure to stop the vehicle b efore
makin g any settin g chan g es to the
traction control system. Chan g in g
settin g s while ri d in g can d istract the
operator an d increase the risk of an
acci d ent.
TCS settings can be changed only
when the vehicle is stopped and the
throttle closed.

Push the “TCS” button to change
between TCS settings “1” and “2”.

Push the button for two seconds
to turn the traction control system
off.

Push the button again to turn trac-
tion control back on (TCS will re-
turn to the previous setting).
Resettin g the traction control sys-
tem
The traction control system will auto-
matically disable when:

a wheel comes off the ground
while riding.
1. “TCS” button
2. TCS display
3. Traction control system indicator light “
”
1 3 2
UBD510E0.book Page 20 Tuesday, July 17, 2018 1:55 PM