MX49/MX61 Reference Manual
Creating a Song with a
computer
4
Modulation wheel
Even though the Modulation wheel is conventionally used to apply vibrato to the
sound, many of the preset Voices (
) have other functions and effects
assigned to the wheel. The higher up you move this wheel, the greater the effect
that is applied to the sound. To avoid accidentally applying effects to the current
Voice, make sure the Modulation wheel is set to minimum before you start playing.
Various functions can be assigned to the Modulation wheel in the Ctrl Set display
(
) of Voice Edit.
Knobs
The four Knobs let you change various aspects of the Voice’s sound in real time—while you play. Three functions can be
assigned to each Knob, alternatively selected via the [KNOB FUNCTION] button. Also, the sound which is applied to
the Knob effects is determined via the [PART 1-2 LINK] button. For details, see
NOTE
For instructions on using the Knobs, see the “Owner’s Manual.”
DAW Remote
Press [DAW REMOTE] to enter the Remote mode. In the Remote mode, you can operate the DAW software or VSTi
(software instrument) from the panel controls. Entering the Remote mode will change the functions of some panel
buttons—for example, Knobs [A] – [D], the Transport button, and Category buttons—to functions exclusive to this
mode. For details, see the “Remote Control Assignments” of the “Using a Connected Computer” section on
.
Maximum
Minimum
