background image

MX49/MX61 Owner’s Manual

Quick Guide

25

NOTE

The 128 Performances are divided into eight groups (A 
– H), each of which consist of sixteen Performances. To 
select these groups of Performances, simultaneously 
hold down [SHIFT] and use the [DATA] dial or [INC/
YES]/[DEC/NO] buttons.

3

Play the keyboard.

If the lamp of the [

R

/

K

] (Play/Pause) button flashes 

before playing the keyboard, playing the keyboard 
starts the Rhythm Pattern (Key On Start function). In 
this case, play the keyboard with the Rhythm Pattern. 
To stop the Rhythm Pattern, press [

J

] (Stop).

Also, if the Arpeggio playback continues after you’ve 
finished playing, press [ARP] to stop the Arpeggio.

4

When you’re done trying out the various 
Performances, press [EXIT] to return to the 
Top display.

The display showing the currently selected Part 1 and 
Part 2 is called up.

Playing back Rhythm 
Patterns

The MX49/MX61 features a wide variety of Rhythm 
Patterns. An appropriate Rhythm Pattern is assigned to 
each Performance.

Playing the keyboard with the 
Rhythm Pattern

1

After selecting a Performance, with the [

R

/

K

(Play/Pause) lamp flashing, play the 
Keyboard.
If the [

R

/

K

] (Play/Pause) lamp is turned off, 

press [

R

/

K

] (Play/Pause), then play the 

keyboard.

The lamp of [

R

/

K

] (Play/Pause) flashes quickly and 

the Rhythm Pattern plays back.

2

To pause the Rhythm Pattern, press [

R

/

K

(Play/Pause). To resume playback, press [

R

/

K

] (Play/Pause) again.

3

Press [

J

] (Stop) to stop the Rhythm Pattern.

HINT

You can select Performances in sequence with a 
footswitch by connecting an FC4/FC5 to the 
[SUSTAIN] jack and setting as follows. Keep in mind 
that the sustain function cannot be used in this case.
[UTILITY] 

 Select “03:Controller” 

 [ENTER] 

 

“FS” = “PC inc” / “PC dec.”

LD

*

:073:BuzzAround 

LD

*

:012:Rap

*

Lead

*

1

HINT
Using the Key On Start function

The Key On Start function automatically starts a 
Rhythm Pattern when you play a key on the 
keyboard. Especially convenient in live performance 
situations, this allows you to start playing the 
keyboard and have the Rhythm Pattern instantly 
start playback at the same time. There are some 
Performances which are automatically set to 
standby condition for the Key On Start function. In 
this case, you can automatically use the Key On 
Start function simply by playing the keyboard. For 
other Performances, enable the function as 
described below.

1

While holding down [

J

] (Stop) press [

R

/

K

] (Play/Pause).

The lamp of [

R

/

K

] (Play/Pause) flashes slowly, 

and the selected Performance is set to standby 
status for the Key On Start function.

Содержание MX49

















































Отзывы: