Messages before the installer is activated
Case
Correction
The power is shut off or
Re-installation is required.
the USB memory was removed during operation. (Perform the installation procedure all over again.)
An error message appears on the screen
Check each of the following items.
and it is not possible to execute installation.
•
Is the USB memory inserted properly ?
•
Is the USB memory terminal free from dust or the like ?
•
Is the date for rewriting included in the USB memory ?
•
Does the data for rewriting exist in the USB memory toot ?
•
Is the data in the USB memory or the USB memory itself in good condition ?
(Try installation again using another USB memory.)
•
Is the data for rewriting in match with the model ?
Troubleshooting
Message
Meaning
This message is displayed when:
Now loading...
The installer is being read.
The installer is being read.
(C)2012 Yamaha
To indicate the copyright.
Media error!
An error has occurred with the media.
Reading of the installer failed: (faulty media)
Reading of the installer file failed.
I/O error: (The media is partially damaged.)
Checksum error!
An error has occurred with the checksum of the installer. Reading of the installer failed: (incorrect checksum)
The checksum included in the installer file is inapplicable.
The file is damaged or tampered.
Please eject the media.
Remove the media.
An error has occurred.
Please insert the media. Insert the media to be installed.
The booter is activated.
Installer not found!
The installer cannot be found
The installer is not detected.
The installer file applicable to the instrument is not found.
Installer data error!
An error has occurred with the installation program.
The writing address is incorrect.
The file is damaged or tampered.
Installer data mismatch!
An error has occurred with the installation updating data. The installer data is mismatched.
The installer data of a different model is used.
The installer of the version which cannot be updated is used.
Program error!
An error has occurred with the program.
The main program cannot be detected and jumped to.
The program for the instrument is not installed.
Please update the OS.
Install the main program.
Same as above.
Booter ver.XXX
To indicate the title.
The media can't be used. The media has not been formatted or supported.
The installer cannot be read from the media.
The media is none of FAT12, FAT16 or FAT32.
The media is not formatted.
The system area in the media is damaged.
50
MX61/MX49
Содержание MX49
