Yamaha MusicCast VINYL 500, Руководство пользователя

Страница: 41 / 404

When necessary
|
Troubleshooting
41
English
En
Network
Problem Cause Action
Reference
page
Unable to use the network
function.
The network parameters (IP address) have not been obtained
properly.
Enable the DHCP server function of your router. —
The audio output select switch of this unit is set to PHONO
OUT.
Set the audio output select switch of this unit to LINE OUT. 14
The WIRELESS switch located on the back panel of this unit
is turned OFF. Set the WIRELESS switch located on the back panel of this
unit to AUTO.
14
You are attempting to connect to an IPv6 type router.
This unit is not compatible with IPv6 networks. Connect it to
an IPv4 network.
—
The unit is unable to connect
to the Internet via a wireless
LAN router (access point).
The wireless LAN router (access point) is turned off. Turn on the power to the wireless LAN router (access point). —
The unit and the wireless LAN router (access point) are too far
apart. Place the unit and the wireless LAN router (access point)
closer to each other.
—
There is an obstacle between the unit and the wireless LAN
router (access point). Remove the obstruction that is between this unit and your
wireless LAN router (access point).
—
The wireless network cannot
be used.
A device emitting electromagnetic waves (such as a
microwave oven, a wireless device and so on) may be located
nearby.
When connecting the unit wirelessly, do not use it near
devices that emit electromagnetic waves.
—
Access to the network is restricted by the firewall settings of
the wireless LAN router (access point). Check the firewall settings of the wireless LAN router (access
point).
—
The computer (server) cannot
be detected.
The media sharing settings on the PC (or server) may be
incorrect. Modify the media sharing settings so that the unit will be able
to access the folders on the PC (or server).
—
Access is restricted due to the security settings on the PC (or
server) or router.
Check the security settings on the PC (or server) or router. —
The unit and the PC are not connected to the same network.
Check the network connection and the router settings to
make sure that they are connected to the same network.
—
Files on the PC (or server) are
not displayed (or played
back).
The file format is not supported by the unit or the PC (or
server). Be sure to use a file format that is supported by the unit and
the PC.
43