Yamaha MTN320-A, Руководство пользователя

Страница: 83 / 94

Motorcycle care an d stora g e
7-2
7

harsh chemicals, inclu d in g
stron g aci d ic wheel cleaners,
especially on spoke or ma g ne-
sium wheels.

harsh chemicals, a b rasive
cleanin g compoun d s, or wax on
matte-finishe d parts. Brushes
can scratch an d d ama g e the
matte-finish, use soft spon g e or
towel only.

towels, spon g es, or b rushes
contaminate d with a b rasive
cleanin g pro d ucts or stron g
chemicals such as, solvents,
g asoline, rust removers, b rake
flui d , or antifreeze, etc.
Before washin g
1. Park the vehicle out of direct sun-
light and allow it to cool. This will
help avoid water spots.
2. Make sure all caps, covers, elec-
trical couplers and connectors are
tightly installed.
3. Cover the muffler end with a plas-
tic bag and a strong rubber band.
4. Pre-soak stubborn stains like in-
sects or bird droppings with a wet
towel for a few minutes.
5. Remove road grime and oil stains
with a quality degreasing agent
and a plastic-bristle brush or
sponge.
NOTICE:
Do not use
d e g reasin g a g ent on areas re-
quirin g lu b rication such as
seals, g askets, an d wheel axles.
Follow pro d uct instructions.
[ECA26290]
Washin g
1. Rinse off any degreaser and spray
down the vehicle with a garden
hose. Use only enough pressure
to do the job. Avoid spraying wa-
ter directly into the muffler, instru-
ment panel, air inlet, or other inner
areas such as underseat storage
compartments.
2. Wash the vehicle with a quality au-
tomotive-type detergent mixed
with cool water and a soft, clean
towel or sponge. Use an old tooth-
brush or plastic-bristle brush for
hard-to-reach places.
NOTICE:
Use col d water if the vehicle has
b een expose d to salt. Warm wa-
ter will increase salt’s corrosive
properties.
[ECA26301]
3. For windshield-equipped vehicles:
Clean the windshield with a soft
towel or sponge dampened with
water and a pH neutral detergent.
If necessary, use a high-quality
windshield cleaner or polish for
motorcycles.
NOTICE:
Never use
any stron g chemicals to clean
the win d shiel d . A dd itionally,
some cleanin g compoun d s for
plastic may scratch the win d -
shiel d , so b e sure to test all
cleanin g pro d ucts b efore g en-
eral application.
[ECA26310]
4. Rinse off thoroughly with clean
water. Be sure to remove all deter-
gent residues, as they can be
harmful to plastic parts.
After washin g
1. Dry the vehicle with a chamois or
absorbent towel, preferably mi-
crofiber terrycloth.
UB6WE0E0.book Page 2 Friday, March 27, 2020 11:37 AM