Perio
d
ic maintenance an
d
a
d
justment
7-32
7
4. If the fuse immediately blows
again, have a Yamaha dealer
check the electrical system.
5. After the fuse is changed, place
the battery cover in the original
position, and then install the bolts.
6. Install the diagnostic connector by
pushing it downward.
7. Install the seat holder by installing
the bolts, and then tighten the
bolts to the specified torque.
8. Install the seat.
EAU80380
Vehicle li
g
hts
Except for the license plate light bulb,
this model’s lights are all LED.
If an LED light does not come on,
check the fuses and then have a
Yamaha dealer check the vehicle. If the
license plate light does not come on,
check and replace the bulb. (See page
7-32.)
NOTICE
ECA16581
Do not affix any type of tinte
d
film or
stickers to the hea
d
li
g
ht lens.
EAU24331
License plate li
g
ht
If the license plate light does not come
on, have a Yamaha dealer check the
electrical circuit or replace the bulb.
Ti
g
htenin
g
torque:
Seat holder bolts:
7 N·m (0.7 kgf·m, 5.2 lb·ft)
1. Headlight/Auxiliary light
1
UBEE20E0.book Page 32 Friday, October 29, 2021 9:28 AM
