Yamaha MT1X, Уполномоченное руководство по продукции

Страница: 13 / 42

MONITOR LEVEL CONTROLS
When setting the PHONES SELECT Switch to the
MONITOR position, these level controls are used for each
track to achieve a level balance for easy monitoring. Use
these controls freely and independently to maintain a
desired level balance during overdubbing operations,
when the addition of a new signal changes the volume.
MONITOR PAN CONTROLS
When setting the PHONES SELECT Switch to the
MONITOR position, use these pan controls for each track
to achieve the desired stereo positioning for each track.
Use these controls freely and independently to maintain
the desired stereo position balance during overdubbing
operations, when the addition of a new signal changes
the stereo image.
PHONES CONTROL
This control adjusts the volume of the headphones (See
page 9).
CONNECTOR SECTION
FRONT PANEL
INPUT JACKS PHONES JACK
These four jacks are for the connection of microphones
or electric and electronic instruments. With a high input
impedance of 10K ohms, and a specified input level range
of -10dB to -50dB, a wide variety of instruments and
microphones can be used.
When directly connecting an electric guitar, the use of
an special electric guitar preamp to increase the input
level will assure recordings of better sound quality.
Plug a set of headphones into this jack for monitoring.
Please use headphones rated from 8-—0 ohms for best
results.
PUNCH IN/OUT JACK
By connecting the optional FS-1 footswitch to this jack,
you can control punch-in/punch-out operations. by foot.
REAR PANEL
11