Yamaha MT1X, Уполномоченное руководство по продукции

Страница: 20 / 42

— Drum Recording Procedure —
1. Connections
Plug the AC adaptor into an AC outlet, and insert
the small round plug into the DC IN jack.
Plug the four microphones into input jacks 1-4.
Plug a pair of monitor headphones (rated 8-40
ohms) into the PHONES jack.
When using an effect, connect it between the AUX
SEND jack (input) and either of the AUX RTN jacks
(output).
2. Getting ready
Lift open the cassette door and insert a chrome
position (CrO
2
) tape.
Bias: HIGH, Eq: 70us.
Return all the switches and controls to their nor-
mal positions, referring to the control panel illustra-
tion on pages 4~9.
Turn the power switches on for the effect and
microphones, and then turn the MT1X “ON”. The
POWER indicator will light.
3. Setting up the recorder section
Press the RESET switch to return the counter to
“000".
Turn “ON” the ZERO STOP switch.
Turn “ON” the dbx switch.
Set the RECORD SELECT switch 1 to the “L” posi-
tion. This is to record the Left stereo signal onto
track 1. The REC indicator will begin flashing.
18