Yamaha MT09N, Руководство пользователя

Страница: 97 / 116

Motorcycle care an d stora g e
9-2
9
chemicals such as, solvents,
g asoline, rust removers, b rake
flui d , or antifreeze, etc.
Before washin g
1. Park the vehicle out of direct sun-
light and allow it to cool. This will
help avoid water spots.
2. Make sure all caps, covers, elec-
trical couplers and connectors are
tightly installed.
3. Cover the muffler end with a plas-
tic bag and a strong rubber band.
4. Pre-soak stubborn stains like in-
sects or bird droppings with a wet
towel for a few minutes.
5. Remove road grime and oil stains
with a biodegradable degreaser
(YAMACLEAN Pro-Wash Spray)
and a plastic-bristle brush or
sponge.
NOTICE:
Do not use
d e g reasin g a g ent on areas re-
quirin g lu b rication such as
seals, g askets, an d wheel axles.
Follow pro d uct instructions.
[ECA26290]
Washin g
1. Rinse off any degreaser and spray
down the vehicle with a garden
hose. Use only enough pressure
to do the job. Avoid spraying wa-
ter directly into the muffler, instru-
ment panel, air inlet, or other inner
areas such as underseat storage
compartments.
2. Wash the vehicle with a quality au-
tomotive-type detergent
(YAMALUBE Wash & Wax) mixed
with cool water and a soft, clean
towel or sponge. Use an old tooth-
brush or plastic-bristle brush for
hard-to-reach places.
NOTICE:
Use col d water if the vehicle has
b een expose d to salt. Warm wa-
ter will increase salt’s corrosive
properties.
[ECA26301]
3. For windshield-equipped vehicles:
Clean the windshield with a soft
towel or sponge dampened with
water and a pH neutral detergent.
If necessary, use a high-quality
windshield cleaner (YAMACLEAN
Glass Cleaner) or windshield pol-
ish.
NOTICE:
Never use any
stron g chemicals to clean the
win d shiel d . A dd itionally, some
cleanin g compoun d s for plastic
may scratch the win d shiel d , so
b e sure to test all cleanin g pro d -
ucts b efore g eneral application.
[ECA26310]
4. Rinse off thoroughly with clean
water. Be sure to remove all deter-
gent residues, as they can be
harmful to plastic parts.
After washin g
1. Dry the vehicle with a chamois or
absorbent towel, preferably mi-
crofiber terrycloth.
2. For drive chain-equipped models,
dry and then lubricate it to prevent
rust.
3. Use a chrome polish to shine
chrome, aluminum, and stainless
steel parts. Often the thermally in-
duced discoloring of stainless
steel exhaust systems can be re-
moved through polishing.
4. Apply a corrosion protection spray
(YAMALUBE Silicone Protectant &
Lubricant) on all metal parts in-
cluding chrome or nickel-plated
surfaces.
WARNING! Do not ap-
UB7N11E0.book Page 2 Tuesday, August 31, 2021 5:08 PM