Yamaha MT-10 2020, Руководство пользователя

Страница: 71 / 120

Periodic maintenance and adjustment
8-11
1
2
3
4
5
6
7
8
9
10
11
12
rial enters the crankcase.
To check the engine oil level
1. After warming up the engine, wait
a few minutes for the oil level to
settle for an accurate reading.
2. With the vehicle on a level surface,
hold it upright for an accurate read-
ing.
3. Check the oil level through the
check window located at the bot-
tom of the left-side of the crank-
case.
TIP
The engine oil should be between the
minimum and maximum level marks.
4. If the engine oil is at or below the
minimum level mark, remove the
oil filler cap and add oil
5. Check the O-ring for damage, and
replace if necessary.
6. Install the engine oil filler cap.
To change the engine oil (and filter)
1. Start the engine, warm it up for
several minutes, and then turn it
off.
2. Place an oil pan under the engine
to collect the used oil.
3. Remove the engine oil filler cap,
the engine oil drain bolt and its
gasket to drain the oil from the
crankcase.
1. Engine oil level check window
2. Maximum level mark
3. Minimum level mark
1. Engine oil filler cap
2. O-ring
2
1
3
1
2
1. Engine oil filler cap
1
B67-9-13.book 11 ページ ２０１９年７月１９日 金曜日 午後２時５６分