MOXF6/MOXF8 Reference Manual
Voice Mode
52
Voice Job
Voice Job features several basic operations, such as Initialize and Copy. After setting parameters as required in the
selected display, press the [ENTER] button to execute the Job.
This resets (initializes) all Voice parameters to their default settings. It also allows you to selectively initialize certain
parameters, such as Common settings, settings for each Element/Drum key, and so on—very useful when creating a
completely new voice from scratch.
Parameter Type to be initialized
ALL: All data in Common Edit and Element (Key) Edit
Common: Data in Common Edit
EL: Data of the corresponding Element Edit (or Key Edit) parameters
with WaveNo.: If this is checked, the Wave Bank/Wave Number assigned to the Elements (Keys) will be initialized.
NOTE
In order to select “Common” or “EL,” the “ALL” box must be unchecked.
NOTE
If you turn the check mark on when a Drum voice is selected, you can select a Drum key.
If you are editing a Voice and select a different Voice without storing your edited one, all the edits you’ve made will be
erased. If this happens, you can use Edit Recall to restore the Voice with your latest edits intact.
From this display you can copy Common and Element/Drum
Key parameter settings from any Voice to the Voice you are
editing. This is useful if you are creating a Voice and wish to
use some parameter settings from another Voice.
Data type to be copied (Type)
Common: Data in the Common Edit
Element (1 – 8): Data of the corresponding Element Edit
parameters
Key C0 – C6: Data of the corresponding Key Edit parameters
Copy procedure
1. Select the Source Voice.
When “Current” is selected in the Source Voice, the Source Voice will be same as the Destination Voice. If you wish
to copy one Element to another Element in the same Voice, select “Current.”
2. Select the Destination Voice (Current Voice).
3. When “Element” or “Key” is selected in the Source Voice, select the Part/Key to be copied in the Destination Voice.
4. Press the [ENTER] button.
Allows you to send all your edited parameter settings for the currently selected Voice to a computer or another MIDI
instrument for data archiving. Press the [ENTER] button to execute the Bulk Dump.
NOTE
In order to execute Bulk Dump, you will need to set the correct MIDI Device Number, with the following operation: [UTILITY]
[F6] MIDI
[SF1] CH
DeviceNo.
Operation
[VOICE]
Voice selection
[JOB]
[F1] INIT (Initialize)
[F2] RECALL (Edit Recall)
[F3] COPY
[F4] BULK (Bulk Dump)
Source
V
oice
Destination
V
oice