Yamaha MOXF8 Скачать руководство пользователя страница 154

Страница: 154 / 163

MOXF6/MOXF8 Reference Manual

File Mode

Supplementary Information

154

next highest level (directory A). Next, go up one more level (to the root directory). Now that both A and B are available,

open directory B. In this way you can move up or down as desired through the folder hierarchy.

Path

The location of the directories (folders) and files currently indicated at the “Dir” line on the display is referred to as a

“path.” This indicates the current directory, which device it belongs to, and in which folder(s) it is contained. “Directory

C” illustrated above is described as path “USB_HDD/A/C.”

Mount

Refers to the operation that enables an external memory device for use with the instrument. A USB flash memory device

is automatically mounted as soon as it is connected to the USB [TO DEVICE] terminal on the rear panel of the MOXF6/

MOXF8. The reverse procedure (removing) is called “Unmount.”

Format

The operation of initializing a storage device (such as a hard disk) is referred to as “format.” The format operation erases

all data from the target memory device and is irreversible.

Save/Load

“Save” means that the data created on the MOXF6/MOXF8 is saved to the USB flash memory as a file, while “Store”

means that the data created on the MOXF6/MOXF8 is stored to internal memory. “Load” means that the file on the USB

flash memory is loaded to internal memory.

[SF1] CURRENT

Indicates the currently recognized flash memory device.

USB Device

Status Free

Indicates the amount of free capacity for the currently recognized USB flash memory device.

Status Total

Indicates the amount of total memory for the currently recognized USB flash memory device.

Expansion Module

Unmounted
Unformatted
Formatted

Indicates the status for the currently recognized Flash memory expansion module (optional).

Status Free

Indicates the amount of free memory capacity for the currently recognized Flash memory expansion module
(optional).

Status Total

Indicates the amount of total memory for the currently recognized Flash memory expansion module (optional).

[SF2] FORMAT

Formats the USB flash memory device connected to the instrument. Before you can use a new USB flash memory

device with the MOXF6/MOXF8, you will need to format it. For instructions on formatting, see

page 161

Volume Label

Determines the name of the Volume Label. The name can contain up to eleven characters, and is entered by using the

[DATA] dial and cursor [<]/[>] buttons. Pressing the [SF6] button calls up the character list for entering the name. For

detailed instructions on naming, see the “Basic Operation” of the Owner’s Manual.

Free

Indicates the amount of free/total memory for the currently recognized USB flash memory device.

[F1] CONFIG (Configuration)

Содержание MOXF8




































































































































































Результаты поиска

Содержание MOXF8

Отзывы:

Похожие инструкции для MOXF8

Бренды по названию

Популярные бренды

Yamaha MOXF8, Справочное руководство

Результаты поиска

Содержание MOXF8

Отзывы:

Похожие инструкции для MOXF8

Бренды по названию

Популярные бренды