manualshive.com logo in svg

Yamaha Motif-Rack XS, Руководство пользователя

Yamaha Motif-Rack XS - универсальный синтезатор в формате раковины, предлагающий бесконечные возможности музыкального творчества. Проверьте Code List и скачайте руководство пользователя бесплатно на manualshive.com. Погрузитесь в мир звука с Yamaha Motif-Rack XS.

Поделиться
Скачать
background image

Rear Panel

MOTIF-RACK XS Owner’s Manual

12

Basic Structure

Ref

erence

V

oice

Multi

Utility

The Contr

ols & 

Connector

s

Setting Up 

Listening to

the Sound

Connections

Using a Computer

Quic

k Guide

Appendix

1

mLAN expansion board (mLAN16E2) cover (page 
108)

The optional mLAN16E2 can be installed by removing this 
cover. By installing a mLAN16E2 board, you can upgrade 
your MOTIF-RACK XS for convenient and easy connection to 
an IEEE1394-compatible computer. 

2

USB TO HOST terminal (page 17)

The USB TO HOST terminal is used to connect this 
instrument to the computer via the USB cable and allows you 
to transfer MIDI data between the devices. 

3

MIDI IN/OUT terminal

MIDI IN is for receiving control or performance data from 
another MIDI device, such as an external sequencer, letting 
you control the MOTIF-RACK XS from the connected 
separate MIDI device. MIDI OUT is for transmitting all control 
(via knobs and buttons) and playback data from the MOTIF-
RACK XS to another MIDI device, such as an external 
sequencer. 
When the “MIDI Soft Thru” parameter (page 100) is set to 
“on” in the MIDI display of the Utility mode, MIDI messages 
received via MIDI IN are forwarded through MIDI OUT. 

4

DIGITAL OUTPUT terminal

Use this terminal to output digital signals via a coaxial (RCA-
pin) cable. The digital signal format is CD/DAT (S/P DIF). This 
terminal outputs a digital signal of 44.1 kHz/24 bit. By using 
this jack, you can record the keyboard performance or Song/
Pattern playback of this synthesizer to external media (e.g., a 
CD recorder) with exceptionally high-quality sound—thanks 
to the direct digital connection. 

5

ASSIGNABLE OUTPUT L and R jacks

Line level audio signals are output from this instrument via 
these phone jacks (1/4" mono phone plug). These outputs are 
independent of the main output (at the L/MONO and R jacks 
below), and can be freely assigned to any of the Drum Voice 
keys or the Parts. This lets you route specific Voices or sounds 
for processing with a favorite outboard effect unit. The Parts 
which can be assigned to these jacks are as follows: 

•

 

Audio Parts in the Voice mode (page 102)

•

 

Drum Voice keys to which drum/percussion instruments 

have been assigned (page 85)

•

 

Any Part of a Multi* (pages 92 and pages 95)

*Includes the Audio Input Part (mLAN IN Part)

6

OUTPUT L/MONO and R jacks (page 13)

Line level audio signals are output via these phone jacks. For 
monophonic output, use just the L/MONO jack.

7

DC IN terminal (page 13)

Connect an AC power adaptor to this jack.

Use only the included power adaptor (or an equivalent 
recommended by Yamaha). Use of a different adaptor may 
result in equipment damage, overheating, or fire. Doing so 
will also immediately void the product warranty, even if the 
effective warranty period has not expired. 

8

Cable Clip (page 13)

Wrap the DC output cable of the adaptor around this cable 
clip to prevent accidental unplugging of the cable during 
operation. 

Rear Panel

7 8

1

2

6

5

4

3

■

 When the optional mLAN16E2 has been installed:

1

 mLAN (IEEE1394) terminal 1, 2

For connecting mLAN devices or IEEE1394-compatible 
(FireWire) devices via standard IEEE1394 (6-pin) cables. 

n

Yamaha recommends that you use an IEEE1394 cable with a length of 
4.5 meters or less.

About mLAN

“mLAN” is a digital network designed for musical applications. It 
uses and extends the industry standard IEEE1394 high 
performance serial bus. By connecting the MOTIF-RACK XS to a 
computer in a peer-to-peer connection via an IEEE1394 cable, 
you can transfer audio data for all channels and MIDI data for all 
ports simultaneously between the MOTIF-RACK XS and the 
computer. This kind of connection, its capabilities and uses are 
referred to as “mLAN” in this Owner’s Manual and the MOTIF-
RACK XS instrument. 

For details and the latest information on mLAN, refer to the 
following URL:
http://www.yamahasynth.com/

*The name “mLAN” and its logo (above) are trademarks of Yamaha Corporation. 

USB

USB is an abbreviation for Universal Serial Bus. It is a serial 
interface for connecting a computer with peripheral devices, and 
enables much faster data transfer compared to conventional 
serial port connections.

1

WARNING

Содержание Motif-Rack XS























































































































Отзывы:

Нет отзывов

Похожие инструкции для Motif-Rack XS

Macally SLIMKEYPRO User Manual preview
SLIMKEYPRO
Бренд: Macally Страницы: 16
Subaru SPN0001105 User Manual preview
SPN0001105
Бренд: Subaru Страницы: 44
Alesis QS6 Service Manual preview
QS6
Бренд: Alesis Страницы: 97
Volkswagen 3C0 054 630 Assembly Instructions Manual preview
3C0 054 630
Бренд: Volkswagen Страницы: 44
BFT Espas 20I Installation Manual preview
Espas 20I
Бренд: BFT Страницы: 124
KeySonic ACK-109 BL User Manual preview
ACK-109 BL
Бренд: KeySonic Страницы: 2
Polaroid Road Ranger C201 Quick Start Manual preview
Road Ranger C201
Бренд: Polaroid Страницы: 34
ENHANCE GX-K1 User Manual preview
GX-K1
Бренд: ENHANCE Страницы: 7
360VRFit M2ME IoT Sensor Instruction Manual preview
M2ME IoT Sensor
Бренд: 360VRFit Страницы: 2
perixx PERIBOARD-312 User Manual preview
PERIBOARD-312
Бренд: perixx Страницы: 13
perixx PERIBOARD-317 User Manual preview
PERIBOARD-317
Бренд: perixx Страницы: 21
Roland E-300 Owner'S Manual preview
E-300
Бренд: Roland Страницы: 92
Partner KB-1140M User Manual preview
KB-1140M
Бренд: Partner Страницы: 12
Partner ER400 Professional User Manual preview
ER400 Professional
Бренд: Partner Страницы: 25
Roland E-14 Owner'S Manual preview
E-14
Бренд: Roland Страницы: 124
Paxar 939i Operating Instructions Manual preview
939i
Бренд: Paxar Страницы: 54
Natec Genesis CX55 User Manual preview
Genesis CX55
Бренд: Natec Страницы: 37
Cherry G86-6x4xx Operating Manual preview
G86-6x4xx
Бренд: Cherry Страницы: 8

Бренды по названию

Популярные бренды

Загрузить еще бренды