manualshive.com logo in svg

Yamaha Motif-Rack XS, Руководство пользователя

Yamaha Motif-Rack XS - универсальный синтезатор в формате раковины, предлагающий бесконечные возможности музыкального творчества. Проверьте Code List и скачайте руководство пользователя бесплатно на manualshive.com. Погрузитесь в мир звука с Yamaha Motif-Rack XS.

Поделиться
Скачать
background image

Installing the Optional mLAN16E2

MOTIF-RACK XS Owner’s Manual

108

Basic Structure

Ref

erence

V

oice

Multi

Utility

The Contr

ols & 

Connector

s

Setting Up

Listening to

the Sound

Connections

Using a Computer

Quic

k Guide

Appendix

The optionally available mLAN expansion board (mLAN16E2) can be installed to the MOTIF-RACK XS. By installing an mLAN16E2 
board, you can upgrade your MOTIF-RACK XS for convenient and easy connection to an IEEE1394-compatible computer.

Installation Precautions

Before installing the optional hardware, make sure you have a 
Philips screwdriver and ample space to work. 

•

Before beginning installation, switch off the power to the instrument and 
connected peripherals, and unplug them from the power outlet. Installation or 
removal of any devices should be started ONLY after the instrument (and the 
optional hardware) returns to normal room temperature. Then remove all 
cables connecting the instrument to other devices. (Leaving the power cord 
connected while working can result in electric shock. Leaving other cables 
connected can interfere with work.) 

•

Be careful not to drop any screws inside the instrument during installation. 
(This can be prevented by keeping the optional units and cover away from 
the instrument while attaching). If this does happen, be sure to remove the 
screw(s) from inside the unit before turning the power on. Loose screws 
inside the instrument can cause improper operation or serious damage. If 
you are unable to retrieve a dropped screw, consult your Yamaha dealer for 
advice. 

•

Install the optional units carefully as described in the procedure below. 
Improper installation can cause shorts which may result in irreparable 
damage and pose a fire hazard. 

•

Do not disassemble, modify, or apply excessive force to board areas and 
connectors on optional units. Bending or tampering with boards and 
connectors may lead to electric shock, fire, or equipment failures. 

•

It is recommended that you wear gloves to protect your hands from metallic 
projections on optional units and other components. Touching leads or 
connectors with bare hands may cause finger cuts, and may also result in 
poor electrical contact or electrostatic damage. 

•

Be careful of static electricity. Static electricity discharge can damage the IC 
chips on the mLAN16E2. Before you handle the optional mLAN16E2, to 
reduce the possibility of static electricity, touch unpainted metal parts or a 
ground wire on the devices that are grounded. 

•

Handle the optional units with care. Dropping or subjecting them to any kind 
of shock may cause damage or result in a malfunction. 

•

Do not touch the exposed metal parts in the circuit board. Touching these 
parts may result in a faulty contact. 

•

Be careful not to misplace any of the screws. 

•

Do not use any screws other than what are installed on the instrument. Use 
of incorrect screws can cause damage. 

Installing the mLAN16E2

1.

Turn the power of the MOTIF-RACK XS off, and 
disconnect the AC power adaptor. 

Also, make sure to disconnect the MOTIF-RACK XS from 
any connected external devices. 

2.

Remove the cover for the mLAN16E2 from the rear 
panel.

With the rear panel of this tone generator facing you, 
remove the two screws from the cover.

IMPORTANT

Keep the removed screws in a safe place. They will be used 
when installing the mLAN16E2. Be careful not to misplace 
them. Keep the cover and fixing screws in a safe place for 
future use.

After removing the cover, you will see the metal fittings at 
the bottom of the opening. To avoid cutting or scraping 
your fingers, be careful not to touch them when installing 
the mLAN16E2.

 

3.

Insert the mLAN16E2 along the guide rails.

Push the mLAN16E2 all the way into the slot so that the 
terminal at the end of the mLAN16E2 is correctly inserted 
into the terminal inside the slot. 

4.

Replace the cover with the two screws you removed 
in step 2 above.

Malfunctions or incorrect operation may occur if the 
mLAN16E2 is not properly fastened. 

Installing the Optional mLAN16E2

WARNING

CAUTION

CAUTION

Guide rails

CAUTION

Содержание Motif-Rack XS























































































































Отзывы:

Нет отзывов

Похожие инструкции для Motif-Rack XS

Hammond SKX Introduction Manual preview
SKX
Бренд: Hammond Страницы: 8
Yamaha Clavinova CLP-250 Eigentümer-Handbuch preview
Clavinova CLP-250
Бренд: Yamaha Страницы: 17
Yamaha Arius YDP-C71 Operation Manual preview
Arius YDP-C71
Бренд: Yamaha Страницы: 13
Yamaha Arius YDP-C71 Quick Operation Manual preview
Arius YDP-C71
Бренд: Yamaha Страницы: 2
M-Audio OXYGEN PRO MINI User Manual preview
OXYGEN PRO MINI
Бренд: M-Audio Страницы: 54
Medeli mc 620 Instruction Manual preview
mc 620
Бренд: Medeli Страницы: 56
A4Tech RFKBS-25A Quick Start Manual preview
RFKBS-25A
Бренд: A4Tech Страницы: 9
VDO PITOT-TUBE SPEEDOMETER SET Installation Instructions preview
PITOT-TUBE SPEEDOMETER SET
Бренд: VDO Страницы: 5
Optimus 42-4032 Owner'S Manual preview
42-4032
Бренд: Optimus Страницы: 32
Toyota 100 Series Manual preview
100 Series
Бренд: Toyota Страницы: 11
EchoMaster Pro SA-US4 User Manual preview
SA-US4
Бренд: EchoMaster Pro Страницы: 16
Muirhead 12848 Product Information preview
12848
Бренд: Muirhead Страницы: 2
Vook VS-K300 Operation Manual preview
VS-K300
Бренд: Vook Страницы: 15
Toyota PW501-02010 Installation Instructions Manual preview
PW501-02010
Бренд: Toyota Страницы: 33
KAP KPLAY2 Instruction Manual preview
KPLAY2
Бренд: KAP Страницы: 19
FINTIE Wireless Keyboard User Manual preview
Wireless Keyboard
Бренд: FINTIE Страницы: 6
FINTIE KAW000X User Manual preview
KAW000X
Бренд: FINTIE Страницы: 7
Genesis RM34X Quick Installation Manual preview
RM34X
Бренд: Genesis Страницы: 8

Бренды по названию

Популярные бренды

Загрузить еще бренды