MOTIF-RACK XS Editor Window: Mixer section (when the Voice/Multi is set to “Multi”)
MOTIF-RACK XS Editor Owner’s Manual
19
2
[Part 1-16]/[mLAN Part] tab
Selects the Parts to be edited from [Part 1-16] and [mLAN Part]. The illustration below indicates that the
[Part 1-16] tab is selected.
3
Part
When [Part 1-16] is selected:
This section lets you edit parameters for each Part. Clicking any of 1 – 16 turns the corresponding Part
on. In the example illustration below, Part 1 is active.
n
When editing any of the Voice parameters such as Element parameters for each Part, a small square
appears at the top right of the “1” – “16” box until you store the edited Voice as a User Voice or Mixing Voice
or you save the edited data as a file. This indication is the same as the blue [M] indicator (
).
Part (Part number)
Indicates the Part number. Clicking here turns the corresponding Part on.
n
In some situations, selecting a Part number on the Editor may not change a Part number on the MOTIF-RACK
XS and vice versa, even if the Editor is in the ONLINE status. If you come across such a situation and you
want to match the Part number of the MOTIF-RACK XS with the one in the Editor, change the Part number via
the panel controls of the MOTIF-RACK XS.
Mute/Solo
1
Mute
Sets the Mute status for each Part. Clicking “M” here changes the Mute status for all Parts
simultaneously.
2
Solo
Selects the Solo Part. Only one Part can be soloed at a time.
Category, Bank No. and Voice Name
Indicates the Category Bank and name of the Voice assigned to each Part. When clicking here, the
VOICE LIBRARY window appears at the right half section, letting you select a different Voice for the
current Part. Using the VOICE LIBRARY is the same here as in the Voice mode; for details, refer to
EQ Lo, Mi, Hi (Part EQ)
Adjusts the equalizer settings for each Part.
Ins.FX (Insertion Effect Switch)
Switches the Insertion Effect on or off.
n
Insertion Effects can be applied up to eight Parts.
Cho, Rev, Pan (Chorus, Reverb, Pan)
Adjusts the Chorus Send level, Reverb Send level, and stereo Pan position for each Part by using the
graphic knobs.
Volume
Adjusts the Volume for each Part.
1 2