Yamaha MOTIF ES6, Список данных

Страница: 62 / 88

When controlling Digital Performer:
Functions assigned to [F1] - [F6] and [SF1] - [SF5] buttons
Edited values are not shown on the MOTIF ES display.
Press the [ARPEGGIO ON/OFF] button to indicate the Send/Effect number in the brackets [ ] at the top
of the LCD.
Some parameters may not be available depending on the Effect Type.
The [OPTION], [CONTROL], and [COMMAND] buttons on the Mackie Control correspond respectively to
the [EDIT], [JOB], and [STORE] buttons at left below the LCD.
Additional operations other than those listed above are available. For details, refer to the relevant
documentation of Mackie Control.
Please keep in mind that some functions may not be available.
Button/Controller Functions
In all modes:
[I/O] Calls up the Mode list display.
[LEVEL METERS] Turns the Meter indication on or off.
[SEL] Selects a channel.
[SHIFT] + [SEL] Selects multiple channels.
[MUTE] Mutes or unmutes each channel.
[SOLO] Sets Solo for each channel to on or off.
[REC RDY] Sets the REC RDY of each channel to on or off.
[BANK </>] Scrolls through the track indication every eight channels.
[CHANNEL </>] Scrolls through the track indication channel-by-channel.
[C[CYCLE] Turns Loop on or off.
[TR OVERVIEW] Moves the Track Overview.
[MIXING BOARD] Opens the Mixer window.
[CONTROL] + [EDIT] + [SEL] Opens the Event List window for the selected channel. (Not
available in the Effect mode and Effect Edit mode.)
[COMMAND] + [SEQ EDITOR] Closes the current window.
[OPTION] + [EDIT] + [SEL] Starts the MIDI Edit window. (Not available in the Effect mode and
Effect Edit mode.)
[SEQ EDITOR] Starts the Sequencer Editor window.
[SHIFT]+[SEQ EDITOR] Starts the Soundbites window.
[UNDO] Executes the Undo operation.
[REDO] Executes the Redo operation.
[SAVE] When the lamp lights, press this so that the lamp flashes. Press this
again to execute the Save operation (lamp turns off).
[MARKER] Turns the Marker on or off.
[SHIFT]+[MARKER] Opens the Marker Option window.
[RWD] Press to continuously rewind. Press again to rewind more quickly.
When the Marker is turned on, this operation moves the song
position to the previous Marker.
[FF] Press to continuously fast-forward. Press again to fast-forward
more quickly. When the Marker is turned on, this operation moves
the song position to the next Marker.
[[FF] Moves the song position to the next Marker.
[STOP] Stops recording or playback.
[PLAY] Press to start playback from the current point.
[REC] Press this to start song recording. The [
F
] (Play) and [
I
] (Rec)
lamp are turned on during recording.
ASSIGNMENT
FADER BANKS
Track Groups/Windows
PAN/SEND
PAN/SEND
TONE
ARP FX
Dialog/Record
Transport/Project
EQ
TONE
TONE
ARP FX
ARP FX
EQ
SENDS
I/O PAN EQ BANK-L BANK-R SHIFT
PLUG-INS DYN DIAL RESET KN1-4/5-8
FLIP
CHANNEL-L CHANNEL-R BANK-L BANK-R SHIFT
EDIT LEVEL METERS DIAL RESET KN1-4/5-8
SEQ EDITOR
GROUOP UNGROUP SUSPEND BANK-L BANK-R SHIFT
TR OVERVIEW MIXING BOARD DIAL RESET KN1-4/5-8
OVERDUB
ENTER ESCAPE CLICK COUNTOFF SHIFT
PATCH THRU CLEAR CLIP DIAL RESET KN1-4/5-8
UNDO
SLAVE EXT SYNC MEMORY LINK PRE/POST ROLL BANK-L BANK-R SHIFT
REDO SAVE AUDIBLE MODE KN1-4/5-8
PUNCH
MARKER EDIT GRID CYCLE BANK-L BANK-R SHIFT
SELECT SOLO DIAL RESET KN1-4/5-8
CURSOR-L
CURSOR-DWN CURSOR-UP ZOOM BANK-L BANK-R SHIFT
CURSOR-R SCRUB DIAL RESET KN1-4/5-8
[ZOOM] Switches between Scroll (lamp lights), Zoom (lamp is off), and
Nudge (lamp flashes).
[SCRUB] Turns Scrub on and off. When turned on, you can use the dial to
move the song position. (A malfunction may occur.)
PAN mode [PAN] (or [I/O]
→
knob)
Knobs 1 - 8 (turning) For editing parameters.
Knobs 1 - 8 (pressing)
(Surround Audio Channel) Enters the PANNER Effect Edit mode. Press the [EDIT] button to
return to the PAN mode.
[DYN] + Knobs 1 - 8 (pressing) Resets the edited parameter to the default value (center).
[FLIP] Switches the functions of the Channel Knobs and the Faders.
[PAN] in the PAN mode Turns the Meter on or off.
SndVal mode [SEND] (or [I/O]
→
knob)
Knobs 1 - 8 (turning) For editing parameters.
Cursor [UP] [DOWN] Changes the Send number.
Knobs 1 - 8 (pressing) Sets Mute to on or off.
[DYN] + Knobs 1 - 8 (pressing) Resets the parameter value to the default (0 dB).
[FLIP] Switches the functions of the Channel Knob and the Faders.
[SEND] in the SndVal mode Turns the Meter on or off.
SndOut mode [I/O]
→
Knob
Cursor [UP] [DOWN] Changes the Send number.
Knobs 1 - 8 (turning) Selects the bus for each Send of the track.
Knobs 1 - 8 (turning)
(except when selecting a bus) Switches between Send PRE and POST.
Input mode [I/O]
→
Knob
Knobs 1 - 8 (turning) Selects an input bus for a track.
Output mode [I/O]
→
Knob
Knobs 1 - 8 (turning) Selects an output bus for a track.
Effect mode [PLUG-IN] (or [I/O]
→
Knob)
Knobs 1 - 8 (turning) Selects a Plug-in Effect for each track.
Cursor [UP] [DOWN] Changes the Effect Number.
Knobs 1 - 8 (pressing) Turns the Effect Bypass on or off. When the bus is turned on, X is
indicated above the Effect name.
[EQ] + Knobs 1 - 8 (pressing) Assigns the Parametric EQ to the corresponding track.
[EDIT] + Knobs 1 - 8 (pressing)
(when any track is selected) Enters the Plug-in Effect Edit mode. (Available only when the Plug-
in Effect is selected.) Please keep in mind that some parameters
may not be available depending on the selected Effect Type. Press
the [EDIT] button again to exit from the Edit mode.
Knobs 1 - 8 (turning) For editing parameters.
Cursor [UP] [DOWN] Changes an Effect Number.
[LEFT]/[RIGHT] Calls up the Effect of a different track.
[CHANNEL </>] Changes the parameters to be edited with the Knobs in order one
by one.
[BANK </>] Changes the parameters to be edited with the Knobs in groups of
eight.
[FLIP] Switches the functions of the Channel Knobs and the Faders.
Button/Controller Functions
62
Data List
Remote Control Assignments