Mobile Music Sequencer Owner’s Manual
16
Setting a part’s voice
1. Tap the part button for the part whose voice you wish to set.
2. Tap [VOICE SELECT] from the PART menu.
NOTE
[VOICE SELECT] will be deactivated if VOICE LINK is turned on for the part in question. This
function can be turned off in the Part window, which is displayed by double-tapping the part
button.
3. In the Part Voice Select Editor, select the desired voice
category and voice.
The part will now play with the newly selected voice.
Part Voice Select Editor
1
1
Tap to display a list of categories and voices for the assigned instrument.
When you select one of the listed voices, Mobile Music Sequencer will send
the corresponding program change message to the connected instrument.
NOTE
Tap
, [SYSTEM], [MIDI PORT], and then [HARDWARE] to assign an instrument to this
button.
Editing a part’s voice
1. Tap the part button for the part whose voice you wish to
edit.
2. Tap [EDIT] from the PART menu.
3. Edit the voice using the controllers on the Part Voice Editor.
The effect of your changes will be much more apparent if you play a phrase
from the part or block while editing.
The part will now play with the edited voice.
Part Voice Editor
Voice categories
Voices in the selected category
Tap to restore the original
voice.
Tap to randomize the voice
selection.
