22
■
Bkgrnd Color
Enables you to change the background color of the nodes.
■
OK
Confirms the settings and closes the window.
■
Cancel
Cancels the settings and closes the window.
■
Setup
If the node represents a computer, clicking the [Setup] button displays the mLAN Driver Setup
window (see the Installation Guide).
If the node represents an mLAN device, clicking the [Setup] button displays the mLAN Control
Panel window (see the Installation Guide).
If you cannot change the sampling frequency or the number of output
channels:
To change the computer’s sampling frequency or the number of output channels, you must first shut
down the DAW that is using the mLAN driver.
1. Shut down the DAW or audio sequencer.
2. If you were using mLAN Graphic Patchbay as a plug-in for the host application,
re-start mLAN Graphic Patchbay as a stand-alone application (page 6).
3. In the Node Information window, edit the sampling frequency and/or the
number of output channels as necessary (page 18).
4. Restart the DAW or audio sequencer.